Aggressive Wheels and Stretched Tires....Welcome
Registered User
iTrader: (9)
Join Date: Feb 2006
Location: New Orleans
Posts: 2,354
Likes: 0
Received 0 Likes
on
0 Posts
the guy that did my wheels can do a lot of different custom work like for instants he can turn a set of 17in rims to 18in rims, dip wheels in custom colors, use mag 44 bullet caps as rivets...etc. or like in my situation find a lip that super wide and put it on your original set. i think the widest lip he can provide is the same one he got me that is 7in lip but if you want to do something even crazy wider and go 9in or even 10in, he can cut 2 lips and weld them to make them that wide.
some of the cars that been featured in hellaflush, stance nation, stance work, or any wheel fitment website he probably did their wheels. he has a big rep in the honda world for doing wheels so he's a legit guy.
Registered User
Join Date: Sep 2009
Location: Chicago, IL
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
well in my situation it was either to sell and buy a new set or put out more money to get something that most three piece brand wheels can't offer. i wanted more lip without going to some crazy offset like -50 to get the size of lip i wanted. so i just figure there's no point of buy a new set of wheels.
the guy that did my wheels can do a lot of different custom work like for instants he can turn a set of 17in rims to 18in rims, dip wheels in custom colors, use mag 44 bullet caps as rivets...etc. or like in my situation find a lip that super wide and put it on your original set. i think the widest lip he can provide is the same one he got me that is 7in lip but if you want to do something even crazy wider and go 9in or even 10in, he can cut 2 lips and weld them to make them that wide.
some of the cars that been featured in hellaflush, stance nation, stance work, or any wheel fitment website he probably did their wheels. he has a big rep in the honda world for doing wheels so he's a legit guy.
the guy that did my wheels can do a lot of different custom work like for instants he can turn a set of 17in rims to 18in rims, dip wheels in custom colors, use mag 44 bullet caps as rivets...etc. or like in my situation find a lip that super wide and put it on your original set. i think the widest lip he can provide is the same one he got me that is 7in lip but if you want to do something even crazy wider and go 9in or even 10in, he can cut 2 lips and weld them to make them that wide.
some of the cars that been featured in hellaflush, stance nation, stance work, or any wheel fitment website he probably did their wheels. he has a big rep in the honda world for doing wheels so he's a legit guy.
his work is INSANE
Registered User
iTrader: (28)
Join Date: Jun 2006
Location: Ewa Beach, Hawaii
Posts: 1,981
Likes: 0
Received 0 Likes
on
0 Posts
To run this rim, what body kit do you have? This is the exact look I want but I just dont know if it would fit with my widebody setup. In for specs when you get them back. Are you running BBKs?
Registered User
iTrader: (28)
Join Date: Jun 2006
Location: Ewa Beach, Hawaii
Posts: 1,981
Likes: 0
Received 0 Likes
on
0 Posts
well in my situation it was either to sell and buy a new set or put out more money to get something that most three piece brand wheels can't offer. i wanted more lip without going to some crazy offset like -50 to get the size of lip i wanted. so i just figure there's no point of buy a new set of wheels.
the guy that did my wheels can do a lot of different custom work like for instants he can turn a set of 17in rims to 18in rims, dip wheels in custom colors, use mag 44 bullet caps as rivets...etc. or like in my situation find a lip that super wide and put it on your original set. i think the widest lip he can provide is the same one he got me that is 7in lip but if you want to do something even crazy wider and go 9in or even 10in, he can cut 2 lips and weld them to make them that wide.
some of the cars that been featured in hellaflush, stance nation, stance work, or any wheel fitment website he probably did their wheels. he has a big rep in the honda world for doing wheels so he's a legit guy.
the guy that did my wheels can do a lot of different custom work like for instants he can turn a set of 17in rims to 18in rims, dip wheels in custom colors, use mag 44 bullet caps as rivets...etc. or like in my situation find a lip that super wide and put it on your original set. i think the widest lip he can provide is the same one he got me that is 7in lip but if you want to do something even crazy wider and go 9in or even 10in, he can cut 2 lips and weld them to make them that wide.
some of the cars that been featured in hellaflush, stance nation, stance work, or any wheel fitment website he probably did their wheels. he has a big rep in the honda world for doing wheels so he's a legit guy.
Registered User
iTrader: (3)
Registered User
iTrader: (18)
well in my situation it was either to sell and buy a new set or put out more money to get something that most three piece brand wheels can't offer. i wanted more lip without going to some crazy offset like -50 to get the size of lip i wanted. so i just figure there's no point of buy a new set of wheels.
the guy that did my wheels can do a lot of different custom work like for instants he can turn a set of 17in rims to 18in rims, dip wheels in custom colors, use mag 44 bullet caps as rivets...etc. or like in my situation find a lip that super wide and put it on your original set. i think the widest lip he can provide is the same one he got me that is 7in lip but if you want to do something even crazy wider and go 9in or even 10in, he can cut 2 lips and weld them to make them that wide.
some of the cars that been featured in hellaflush, stance nation, stance work, or any wheel fitment website he probably did their wheels. he has a big rep in the honda world for doing wheels so he's a legit guy.
the guy that did my wheels can do a lot of different custom work like for instants he can turn a set of 17in rims to 18in rims, dip wheels in custom colors, use mag 44 bullet caps as rivets...etc. or like in my situation find a lip that super wide and put it on your original set. i think the widest lip he can provide is the same one he got me that is 7in lip but if you want to do something even crazy wider and go 9in or even 10in, he can cut 2 lips and weld them to make them that wide.
some of the cars that been featured in hellaflush, stance nation, stance work, or any wheel fitment website he probably did their wheels. he has a big rep in the honda world for doing wheels so he's a legit guy.
I cannot wait to see this dude!!! Your 3 piece wheel became a 1 piece though... which is VERY FINE with me.... info on your guy?
Registered User
iTrader: (9)
Join Date: May 2009
Location: RALEIGH, NC
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Anybody have a set of 19x10 / 19x11 LOW offset Work Meister S1 (3pc)? I'm planning on buying this within the next month or so...figured I'd try to find a used set before I buy em brand new. All the ones I've seen on this site so far have been like +20 offset or higher
Registered User
iTrader: (1)
Registered User
iTrader: (9)
Join Date: Feb 2006
Location: New Orleans
Posts: 2,354
Likes: 0
Received 0 Likes
on
0 Posts
thanks royal, cant wait to see your new setup and your new ls1
done!
i didnt even say his name yet and this guy knew who he was all the way from chicago! hahaha but yea that is his forum name, his real name is Ralph
name is Ralph shop number 714-651-7239, hit him up bro!
i have a vertex kit but my plans to fit these wheels will be the same way as everyone does in this thread stretch tires and some negative camber. im pretty sure this is more then what the stock body can handle so im planning on doing what green goblin did to his front fender and keeping both front and rear fenders looking as close to stock looking as possible.
reference for fender work
offset i dont have yet because im still waiting for them to be done but i can tell you they will be 20x11 (-10 to -20) 20x13 (-10 to -20). i also am running a BBK which is the Alliance 8/6 piston BBK. i planned it this way back when i bought the rim back 3 years ago that i was going to get a BBK so i found a used set VS-XX with R-disk in front (which is made to fit BBK) and O-disk in rear. tell you the truth im not even sure they will fit but im pretty sure it will.
one old picture cause i miss my Z, havent driven her in almost 2 months!
give him a call its hard to explain, name is Ralph shop number 714-651-7239
thanks milton, but why is it a 1 piece now? i dont understand lol. holla at the homie, name is Ralph shop number 714-651-7239
name is Ralph shop number 714-651-7239
done!
i didnt even say his name yet and this guy knew who he was all the way from chicago! hahaha but yea that is his forum name, his real name is Ralph
name is Ralph shop number 714-651-7239, hit him up bro!
reference for fender work
offset i dont have yet because im still waiting for them to be done but i can tell you they will be 20x11 (-10 to -20) 20x13 (-10 to -20). i also am running a BBK which is the Alliance 8/6 piston BBK. i planned it this way back when i bought the rim back 3 years ago that i was going to get a BBK so i found a used set VS-XX with R-disk in front (which is made to fit BBK) and O-disk in rear. tell you the truth im not even sure they will fit but im pretty sure it will.
one old picture cause i miss my Z, havent driven her in almost 2 months!
name is Ralph shop number 714-651-7239
Last edited by hatchboi; 08-30-2010 at 10:17 AM.