Aggressive Wheels and Stretched Tires....Welcome
Registered User
iTrader: (1)
Registered User
iTrader: (5)
Join Date: Oct 2006
Location: Dallas, Texas
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
I could try fitting them. I put a 20mm on my z making them 18x12-25 and i still had space to go. Its a close call though and crazy camber but i would give it a try if i didn't have others things in the work. Looking at it from my rear side. The fronts i do not know. Lol
here is mine with a major pull fitting 19x13 -18 under the quarters. could possibly squeeze 5-10mm more depending on camber setting...
chean is right 18s will have alot more clearance due to diameter wise than 19s, just as 20s are harder to fit than 19s in the same specs.
Here some test shot of my spaced out 20x11 -42 (equivalent to 13s -20 which will be the range of my next setup but in 19s) just to give you an idea of what you will be dealing with if you want to attempt those Leons with stock quarters. Chean and my quater panel are flare and pull about the same amount.
Here some test shot of my spaced out 20x11 -42 (equivalent to 13s -20 which will be the range of my next setup but in 19s) just to give you an idea of what you will be dealing with if you want to attempt those Leons with stock quarters. Chean and my quater panel are flare and pull about the same amount.
New Member
iTrader: (25)
I believe they only make them in 19s and they would be more difficult to run than 18s in that offset. just like running 20s are more difficult to run than 19s. I give spoolin and hatchboi major props for running negative negative negative wide 20s.
here is mine with a major pull fitting 19x13 -18 under the quarters. could possibly squeeze 5-10mm more depending on camber setting...
here is mine with a major pull fitting 19x13 -18 under the quarters. could possibly squeeze 5-10mm more depending on camber setting...
Registered User
iTrader: (1)
Join Date: Mar 2010
Location: HAWAII
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
chean is right 18s will have alot more clearance due to diameter wise than 19s, just as 20s are harder to fit than 19s in the same specs.
Here some test shot of my spaced out 20x11 -42 (equivalent to 13s -20 which will be the range of my next setup but in 19s) just to give you an idea of what you will be dealing with if you want to attempt those Leons with stock quarters. Chean and my quater panel are flare and pull about the same amount.
Here some test shot of my spaced out 20x11 -42 (equivalent to 13s -20 which will be the range of my next setup but in 19s) just to give you an idea of what you will be dealing with if you want to attempt those Leons with stock quarters. Chean and my quater panel are flare and pull about the same amount.
i flare and pull about and inch but i was not able to drive cause i did not have a toe arm to correct the toe properly. I had to rig a lower toe/mid link to keep the toe in place while adjusting the camber but by the look of it i will need to run smaller tire to clear the quarter/bumper tab location with the 20s.
Registered User
Join Date: Apr 2004
Location: dallas
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Pics, or it didn't happen. I'd love to see this 19x11 -51 offset on a Z.
Last edited by starve; 11-23-2010 at 03:35 PM. Reason: error
Registered User
iTrader: (18)
This is what I like to see new pics!, Love the black Z on the BMW rims, Chean looking real nice man.
Royal the pic you just posted isn't working for me man, just letting you know, all I see is a blue question mark for some reason.
Royal the pic you just posted isn't working for me man, just letting you know, all I see is a blue question mark for some reason.
Registered User
iTrader: (1)
Registered User
iTrader: (6)
Join Date: Nov 2007
Location: Palm Beach Gardens, Florida
Posts: 1,093
Likes: 0
Received 0 Likes
on
0 Posts