Aggressive Wheels and Stretched Tires....Welcome
12-21-2010, 04:51 AM
Registered User
iTrader: (4)
Join Date: Jun 2008
Location: B-Town
Posts: 459
Likes: 0
Received 0 Likes
on
0 Posts
12-21-2010, 05:02 AM
Registered User
iTrader: (4)
Join Date: Jun 2008
Location: B-Town
Posts: 459
Likes: 0
Received 0 Likes
on
0 Posts
Haven't been on this thread in like two years. People have come a long way and I'm still rocking the exact same setup lol. Time to step my game up.
Tried going through this entire thread front to back in about a week, needless to say... not happening.
Some pics I've taken over the last couple of days.
The process of getting out of my drive way.
I know it looks like I still scrape but I don't, unless I mess up lining the car up with the boards.
I don't know how some of you guys are still running the stock mud flaps. My front ones were literally on the ground when I put my coilovers on and my rear ones came off a couple nights later when I went out drifting. And I've actually gone lower since then. Louisiana roads hate me lol (actually the other way around because I'm sure my car helps flatten the horrible roads here).
This is posted a couple hundred pages back but I know how annoying it is to search for it.
specs are 18x10.5 +15 all around, 25mm spacer in the rear (making it -10)
Tried going through this entire thread front to back in about a week, needless to say... not happening.
Some pics I've taken over the last couple of days.
The process of getting out of my drive way.
I know it looks like I still scrape but I don't, unless I mess up lining the car up with the boards.
I don't know how some of you guys are still running the stock mud flaps. My front ones were literally on the ground when I put my coilovers on and my rear ones came off a couple nights later when I went out drifting. And I've actually gone lower since then. Louisiana roads hate me lol (actually the other way around because I'm sure my car helps flatten the horrible roads here).
This is posted a couple hundred pages back but I know how annoying it is to search for it.
specs are 18x10.5 +15 all around, 25mm spacer in the rear (making it -10)
Car looks good tho man. I hear ya about the mudflaps, I cracked my fronts pretty bad and took them off, but still have the rears on.. I kinda like how they look by squaring off the *** end a little so I left them on. I'm not the lowest on the site but am probably among the lowest on static in the tiny state of vt
12-21-2010, 05:29 AM
Yup def going to be sick with 19s again.. And I will push the limit on these but with -1 to -2 camber... (what size you think to stretch a 305
)
and going to be Rotiforms..
The build will consist of my LS1 swap with extra goodies, front bumper change, new hood, new paint and so on and so on..
)and going to be Rotiforms..
The build will consist of my LS1 swap with extra goodies, front bumper change, new hood, new paint and so on and so on..
I know the Z06 is a 19x12 with 325, so for a stretch on a 305...hm im thinking 13-14.5...Super Concave 3 piece im assuming, theres no other way to go.
Now Im red rocket excited. When are you starting this build?
p.s, i just realized the design of those SW coilovers. The rears are SICK, such a good idea turning them upside down. Personally as far as dampening ive always felt the car handled its best with the rear 2-4 clicks harder than the front, the oem geometry is so tight i felt that the front needed to be a little softer to help the front roll on turn in for initial bite. just my .02
Last edited by Nevaland90; 12-21-2010 at 05:36 AM.
12-21-2010, 08:49 AM
NEGATIVE Ghost Rider hahaa....
my old set up 19x10-4F and 19x11-16R in the rear.
My new set up 18x10-20F and 18x12-5R.
Right now i just got an awesome set of 38mm spacers which is are tested and proven hahah. for an awesome 18x12-43R got pics coming soon and for an awesome 19x11-54R we'll see guys how that looks. BUT, BUT i will not keep this aggressive offsets i am only doing some testing. I will be running a full -1 camber to -1.5
:BTW Why getting blown by one girl, when you can get blown by twins??? Greddy TT being installed as i write on this superthread! Z is on teardown at the moment!!!
12-21-2010, 10:19 AM
because this is true hahaha
live in socal for a while and you'll understand...
12-21-2010, 10:20 AM
Hardest Setting
iTrader: (3)
Join Date: Feb 2008
Location: MexiCali dodging potholes
Posts: 13,406
Received 130 Likes
on
102 Posts
gotta give you guys ****...we watch you every move...
by all means man take your time...what you guys got planned is worth the wait...
I'm saving myself for my revamp on a minicule scale...
GTM supercharger
complete front/rear bushing replacement
uping tire sizes so I can rub some more...
12-21-2010, 12:27 PM
Royal,
Love those black chrome rotiform. Good write up on the coils.
Lito,
I want your hood. I can’t seem to change my computer wallpaper cause of it!
Sorry for the 4x4 status, not happy about it either, but waiting for the coils to drop – gonna be a tough 3 months waiting it out.
Wheels are Advan RS-D Matte Black
w/ powder coated White Edge
F 19x9+25 w/ Falken 452 : 225/35
R 19x10 +15 w/ Falken 452 : 245/35
Not stretched at all compared to most (I was scared) but when the coils reach I will switch to probably 215 front and 235 rear.
25mm spacers for the front and 30mm spacers for the rear, to be installed when the coils reach as well.
Will be getting a new set of wheels hopefully in the summer.
Love those black chrome rotiform. Good write up on the coils.
Lito,
I want your hood. I can’t seem to change my computer wallpaper cause of it!
Sorry for the 4x4 status, not happy about it either, but waiting for the coils to drop – gonna be a tough 3 months waiting it out.
Wheels are Advan RS-D Matte Black
w/ powder coated White Edge
F 19x9+25 w/ Falken 452 : 225/35
R 19x10 +15 w/ Falken 452 : 245/35
Not stretched at all compared to most (I was scared) but when the coils reach I will switch to probably 215 front and 235 rear.
25mm spacers for the front and 30mm spacers for the rear, to be installed when the coils reach as well.
Will be getting a new set of wheels hopefully in the summer.
Last edited by vex008; 12-21-2010 at 12:50 PM.
12-21-2010, 03:24 PM
You just made my Christmas. I had picked up an LS1 and T56 this summer for a crazy deal for my S13 but i ended up getting a offer i couldn't refuse and sold it for the M5. LS1 Z33 is how it should have came from the factory, perfect balance between power and weight..thats going to drift soooo good. I swear before i die i will have a LSX Z33. LS1+flushness=kill the whole game.
I know the Z06 is a 19x12 with 325, so for a stretch on a 305...hm im thinking 13-14.5...Super Concave 3 piece im assuming, theres no other way to go.
Now Im red rocket excited. When are you starting this build?
p.s, i just realized the design of those SW coilovers. The rears are SICK, such a good idea turning them upside down. Personally as far as dampening ive always felt the car handled its best with the rear 2-4 clicks harder than the front, the oem geometry is so tight i felt that the front needed to be a little softer to help the front roll on turn in for initial bite. just my .02
I know the Z06 is a 19x12 with 325, so for a stretch on a 305...hm im thinking 13-14.5...Super Concave 3 piece im assuming, theres no other way to go.
Now Im red rocket excited. When are you starting this build?
p.s, i just realized the design of those SW coilovers. The rears are SICK, such a good idea turning them upside down. Personally as far as dampening ive always felt the car handled its best with the rear 2-4 clicks harder than the front, the oem geometry is so tight i felt that the front needed to be a little softer to help the front roll on turn in for initial bite. just my .02
Man me and you think a like then.. I'm going to send you a pm about some stuff
12-21-2010, 03:27 PM
Okay boys and girls I know this has been a long time but AWOL finally posted up the 512 project vid.. Please click on the link..
Also make sure you watch the whole thing to see what they have for the next episode,, I know you will be excited just has I am..
<iframe src="http://player.vimeo.com/video/18048903?title=0&portrait=0" width="400" height="225" frameborder="0"></iframe><p>AWOL E3 S1 Teaser from <a href="http://vimeo.com/awoltv">AWOL</a> on <a href="http://vimeo.com">Vimeo</a>.</p>
AWOL 512 Project VID....
Also make sure you watch the whole thing to see what they have for the next episode,, I know you will be excited just has I am..
<iframe src="http://player.vimeo.com/video/18048903?title=0&portrait=0" width="400" height="225" frameborder="0"></iframe><p>AWOL E3 S1 Teaser from <a href="http://vimeo.com/awoltv">AWOL</a> on <a href="http://vimeo.com">Vimeo</a>.</p>
AWOL 512 Project VID....
$$$$
12-21-2010, 05:33 PM
Registered User
iTrader: (1)
Join Date: Mar 2010
Location: HAWAII
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts