Aggressive Wheels and Stretched Tires....Welcome
Sep 8, 2011 | 02:33 PM
Joined: Nov 2007
Posts: 7
Likes: 0
From: Bay Area, CA
Quote:
Originally Posted by
Murfdizzle21
im pretty sure that every .5" of width is equal to 12mm, 6 on the inside of the rim, and 6 on the outside.. so when going up or down, for each .5" of width you either add or subtract 6mm on the outside...
you are correct.
if you want to figure inside clearance, just subtract from the offset instead of adding to it.. i.e. to have the same inside clearance of a 9.5", +2mm wheel when going to a 10.5", you'd need it to be about -10mm offset
Sep 8, 2011 | 03:41 PM
Joined: Dec 2008
Posts: 30
Likes: 0
From: NJ
25.6 mm is equal to 1 inch
Sep 8, 2011 | 03:46 PM
Joined: Dec 2008
Posts: 30
Likes: 0
From: NJ
Quote:
Originally Posted by
Murfdizzle21
an 18x11.5 -24 is equal to an 18x12 -18... thats what i thought..
You're right, I did my math with a 11 not 11.5, opps
Sep 8, 2011 | 04:07 PM
Joined: Sep 2008
Posts: 1,133
Likes: 0
From: SoCal
Quote:
Originally Posted by
Murfdizzle21
im pretty sure that every .5" of width is equal to 12mm, 6 on the inside of the rim, and 6 on the outside.. so when going up or down, for each .5" of width you either add or subtract 6mm on the outside...
Thank you
Sep 8, 2011 | 04:45 PM
Joined: Feb 2006
Posts: 3,828
Likes: 2
From: Atlanta
Quote:
Originally Posted by
futureowner
You're right, I did my math with a 11 not 11.5, opps
and your math was still wrong. That would be the effective offset if you were talking about a 10" wheel, not 11" lol.
Sep 8, 2011 | 04:52 PM
Joined: Feb 2006
Posts: 177
Likes: 0
From: Rockville
C & C welcome. Going a little lower next week. Waiting for smaller rear tires.
Sep 8, 2011 | 06:23 PM
Joined: May 2010
Posts: 170
Likes: 0
From: Maryland
pepper that g is looking real clean dude, props. if you dont mind could you PM me about who did your pictures?
Sep 8, 2011 | 07:05 PM
Joined: Nov 2008
Posts: 427
Likes: 1
From: Birmingham, AL
Quote:
Originally Posted by
futureowner
25.6 mm is equal to 1 inch
Actually its 25.4mm in one inch....but who's counting?
Sep 8, 2011 | 07:10 PM
Joined: May 2007
Posts: 1,700
Likes: 0
From: S.A. TX/SO-CAL
New pic
Sep 8, 2011 | 07:21 PM
Joined: May 2007
Posts: 1,700
Likes: 0
From: S.A. TX/SO-CAL
Quote:
Originally Posted by
futureowner
I run a 18 x 11.5 -24, which would be a 18 x 12 +1, I don't rub suspension at all.
Acturally 11.5 -24 is almost a 12.5 et0 or a 12 -12-13ish
Sep 8, 2011 | 07:26 PM
Joined: Nov 2007
Posts: 901
Likes: 0
From: dallas
sa z-boi, ride looks legit.
Sep 8, 2011 | 08:01 PM
Joined: Jun 2007
Posts: 509
Likes: 0
From: South CT
nice pic sa z-boi, that lip is low as f***
Sep 8, 2011 | 08:09 PM
Joined: Jul 2010
Posts: 229
Likes: 0
From: queensbury, ny
Sep 9, 2011 | 03:17 AM
Joined: Nov 2007
Posts: 97
Likes: 0
From: Australia
Quote:
Originally Posted by
bmxpert57
little better photos
specs? and model?
Sep 9, 2011 | 05:14 AM
Joined: Dec 2008
Posts: 30
Likes: 0
From: NJ
Quote:
Originally Posted by
SA Z-boi
Acturally 11.5 -24 is almost a 12.5 et0 or a 12 -12-13ish
Right, when I did my math I used 11 not 11.5 width
Sep 9, 2011 | 05:41 AM
Joined: May 2007
Posts: 1,700
Likes: 0
From: S.A. TX/SO-CAL
Quote:
Originally Posted by
phiooz
sa z-boi, ride looks legit.
this is actually tehkmob's z. He used my computer to post this and I was logged in.
Sep 9, 2011 | 10:29 AM
Joined: Dec 2008
Posts: 461
Likes: 0
From: Nashville, TN
Quote:
Originally Posted by
350zhr
^this
Sep 9, 2011 | 12:10 PM
Joined: Apr 2010
Posts: 169
Likes: 0
From: Northern Ireland
tehkmob's Zed is EPIC ...
Sep 9, 2011 | 12:15 PM
Joined: Oct 2009
Posts: 1,122
Likes: 0
From: Texas
Quote:
Originally Posted by
ChrisNI
tehkmob's Zed is EPIC ...
Ings rep,(Urethane) FG/cf = fail on slammed cars.. haha.. ebay for like $200
Sep 9, 2011 | 12:24 PM
Joined: Apr 2010
Posts: 169
Likes: 0
From: Northern Ireland
haha same for my Chargespeed BottomLine lip
... This Ings would be nice for a change. Im tempted to buy one now.
... This Ings would be nice for a change. Im tempted to buy one now.