Aggressive Wheels and Stretched Tires....Welcome
Registered User
iTrader: (23)
Join Date: Oct 2009
Location: Texas
Posts: 1,122
Likes: 0
Received 0 Likes
on
0 Posts
Registered User
iTrader: (30)
i know this isn't a common setup but has how's the stretch for a 225/40/19 on a 19x9.5 rim and 265/35/19 on a 19x11 rim? Was thinking about 225/35/19 and 255/35/19 but hawaii roads will pop my tire the moment i leave my canyon of a driveway
New Member
iTrader: (4)
225/40 on 19x9.5
http://www.rimtuck.com/photo/view/615/1238732852.jpg/10
Rear specs on this one matches your rear specs listed
265/35 on 19x11 (front wheel specs are 225/35 on 19x9.5)
http://www.rimtuck.com/photo/view/11...4796716.jpg/19
Last edited by vex008; 10-31-2011 at 06:14 AM.
Registered User
iTrader: (6)
Low and Slow, saw you at Canibeat. Thoroughly impressed and normally it takes 3 piece wheels on Z33s impress me. I just love those advans if you ever want to sell them let me know.
got a few more pics.
got a few more pics.
Registered User
iTrader: (3)
Join Date: Dec 2008
Location: california
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Registered User
iTrader: (1)
Join Date: May 2009
Location: jacksonville
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
well it all started out me and a couple buddies 2 z's sti 135i went out to take some pictures.
sweet everythings going good great sunlight not hot out super chill time.
We end up going to this parking garage the entrance was SUPPPER steap.
ended up making it up perfect no scrapes no nothing . we get to the top. its 6 floors up start taking group pics blah blah blah. So now its time to leave we start heading down the garage i scrape once just bearrrrly on the 5th floor (in my head loololol i love scaping on things with my car la la la) my budy infront of me in a z stock hight flying around corner bearly scraped his so im like ok this one is a lil bit steeper and i slow down to like 5 mph clutch i idling second gear going over this little elivation change then BOOOOOOMMM ccccccrchchchchchchhchch all my buddies said loudest noise they have ever heard. in my head im like **** i know exactly what happend i just broke my M brace off and ripped the studs off the chassie this is so shitty wondering how will i drive home i don't have tools in my car blah blah blah
then i get out to find this
im lauphing thinking omygawd no bad damage winnnning
we use my sisor jack and another sisor jack to get the car up pull it out to find this
and this
and this. then i crank my car back up vroom bshshshshhs. like it had a cracked and leaky exhaust nottttt cool (my exhaust berk hfc's $500 HKS hi-power $1500)
this photo shoot is getting expensive lol. end up going to one more spot taking more pics didn't have time check out the car that night or in the morning 5AM shift end up getting it up on jacks after work to see no cracks but a huge dent in a section my exhaust were i had the first two mufflers cut out. cheap easy fix just need more pipe and re weld.
then i keep looking and notice that metal plate caught the M brace and ripped out the driver side front stud from the chassi so i said **** it heated the brace up with propane put a peice of wood under it and bent it back into place and tucked up the front lip of the other side as well. cool.
so no i have to decide how long i am going to rock it like this before i take it to my buddy (amazing welder) and see if i can get him to cut out the damaged stud and put in a metal plate to take its place and weld it in and get a new brace. only time will tell.
im sure half yall know this but word of advice BEND YOUR M BRACE SO IT DOESN'T CATCH ON THINGS AND RIP OUT YOUR STUDS.
sweet everythings going good great sunlight not hot out super chill time.
We end up going to this parking garage the entrance was SUPPPER steap.
ended up making it up perfect no scrapes no nothing . we get to the top. its 6 floors up start taking group pics blah blah blah. So now its time to leave we start heading down the garage i scrape once just bearrrrly on the 5th floor (in my head loololol i love scaping on things with my car la la la) my budy infront of me in a z stock hight flying around corner bearly scraped his so im like ok this one is a lil bit steeper and i slow down to like 5 mph clutch i idling second gear going over this little elivation change then BOOOOOOMMM ccccccrchchchchchchhchch all my buddies said loudest noise they have ever heard. in my head im like **** i know exactly what happend i just broke my M brace off and ripped the studs off the chassie this is so shitty wondering how will i drive home i don't have tools in my car blah blah blah
then i get out to find this
im lauphing thinking omygawd no bad damage winnnning
we use my sisor jack and another sisor jack to get the car up pull it out to find this
and this
and this. then i crank my car back up vroom bshshshshhs. like it had a cracked and leaky exhaust nottttt cool (my exhaust berk hfc's $500 HKS hi-power $1500)
this photo shoot is getting expensive lol. end up going to one more spot taking more pics didn't have time check out the car that night or in the morning 5AM shift end up getting it up on jacks after work to see no cracks but a huge dent in a section my exhaust were i had the first two mufflers cut out. cheap easy fix just need more pipe and re weld.
then i keep looking and notice that metal plate caught the M brace and ripped out the driver side front stud from the chassi so i said **** it heated the brace up with propane put a peice of wood under it and bent it back into place and tucked up the front lip of the other side as well. cool.
so no i have to decide how long i am going to rock it like this before i take it to my buddy (amazing welder) and see if i can get him to cut out the damaged stud and put in a metal plate to take its place and weld it in and get a new brace. only time will tell.
im sure half yall know this but word of advice BEND YOUR M BRACE SO IT DOESN'T CATCH ON THINGS AND RIP OUT YOUR STUDS.
Registered User
iTrader: (7)
Can you please stop posting pictures of Low n slows car? My car is starting to suspect i'm cheating on it.