Notices
Wheels & Tires 350Z Rollers and Rubbers

What should I do????!!!!

Thread Tools
 
Search this Thread
 
Old Dec 9, 2007 | 09:10 PM
  #1  
pimpsahab's Avatar
pimpsahab
Thread Starter
Registered User
iTrader: (1)
 
Joined: Dec 2006
Posts: 253
Likes: 0
From: ORLANDO
Default What should I do????!!!!

Right now i have 19's all around 8.5 in the front and 9.5 in the rear and running +25mm offset all around running 245's in the front and 275's in the rear on my 06 Z with springs..im getting coilovers and a rear camber kit installed and wanted to go as aggressive with the offset as possible!!! what are the most aggressive spacers i could do without rolling the fenders??? i was thinking of doing maybe 15mm spacers in rear and 10mm in front? i know the front would be ok but would the 15mm be too much since it would push it out to a 10mm offset? thanks in advance guys!
Reply
Old Dec 10, 2007 | 12:30 PM
  #2  
pimpsahab's Avatar
pimpsahab
Thread Starter
Registered User
iTrader: (1)
 
Joined: Dec 2006
Posts: 253
Likes: 0
From: ORLANDO
Default

bump for suggestions!
Reply
Old Dec 10, 2007 | 12:59 PM
  #3  
DustinZ33's Avatar
DustinZ33
Registered User
iTrader: (19)
 
Joined: Jul 2006
Posts: 7,312
Likes: 1
From: Houma, LA
Default

Considering you can run a 19x10.5 +23 with 275/35, you shouldn't have any problems. You may need to leave some camber though since your not rolling your fenders.

http://www.1010tires.com/WheelOffsetCalculator.asp

Last edited by DustinZ33; Dec 10, 2007 at 01:03 PM.
Reply




All times are GMT -8. The time now is 02:04 AM.