When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
hey guys, quick quick update. Spoke to the place doing this with us yesterday and they are working on the Meister one first (I didn't ask why). Preliminary info looks like it's going to be a plastic cap, essentially done like a cnc (but for plastic), since they just got the machine and are eager to play around with it. What I need to know from Meister owners is on the rear wheel, how much, if any, does the rear center nut/cotter pin protrube from the face of the wheel. I'd prefer if this info came from someone who has the L, R or T disk. We need to build this into the cap measurement for the CAD drawings. What we're going for is a plastic cap with a very shallow dome so its as unobtrusive as possible
On my 2 piece Miesters the rear cotter pin sticks out past the center of the face by about .8 of an inch if that helps any? An oval center cap for the rear would work best I think. Thanks for doing this for us man, I appreciate it.
nothing to report yet - remember, the place doing this with us does alot of military contract work, so they've been very busy. I'll stop down there end of next week and see how things are working out on the Meister one. Once those are done, we'll get to work on the CR Kai
not sure what you mean by disk type sorry?
...
