Finally pics of the Shines on MY Z :)....
some updated clean Z pics with shines :)....
I know the car is filthy and my driveway is a little unlevel thats why my passenger side looks lower. N95 8gig on the lip to show kinda how the size is. All in all i love them think they are aggressive but not overly and look great on the car. Now a drop is an absolute must. Pic my drop for me eibach prokit? 1inch or the tanabe gf210's 1.2 all around? thanks for looking
im cleaning her tonight and i might snap some more pics.
Last edited by Get_Zwole; Feb 9, 2008 at 01:54 PM.
make sure when you get the springs to also get a front and rear camber kit. The rear is for sure going to be a must. The front you will get away without having one for a little but will need to get one if you don't want them to wear out prematurely. You have the same tires as me and i know you don't want to be replacing them every couple of months, please listen to my advice unless you like spending money on tires. The set-uplooks good you are definetely hurting for a drop. ONE MORE THING MAKE SURE YOU GET A TOE BOLT ALSO I WOULD GO WITH SPC FRONT AND REAR CAMBER KIT LOTS OF ADJUSTMENT.
Last edited by marques1; Feb 7, 2008 at 12:17 PM.
Solid...
i got spc rear camber kit coming this week and i havent even ordered the springs yet so ill be good . It's not my garage haha i moved back in with my rents and took their garage from them so i park in it now haha. The car def. needs to be washed though this oklahoma weather sucks one day last week it was 80 degrees almost the very next day it was kinda misty and snowy and 30 i hate this place.
. It's not my garage haha i moved back in with my rents and took their garage from them so i park in it now haha. The car def. needs to be washed though this oklahoma weather sucks one day last week it was 80 degrees almost the very next day it was kinda misty and snowy and 30 i hate this place.
you will want to consider also the FRONT spc camber kit after you see that your alignment will be off after you drop it in the front and you won't be able to get it back into spec without the front camber kit. That is cool that you have already ordered the rear but your going to need the front also. At least you got the rear though because the rear will be way off.
Trending Topics
If you had normal offsets like your oem wheels you could maybe get away with out the front camber kit but with a more aggressive offset and bigger wheels you will need the front i have the same setup as you but different wheels.
I gotta be honest I'm not as stoked on them as I thought I was gonna be.
they arent bad but I'm just not feeling it. But theres guys on here that run Volks that I dont like either so dont feel too bad. I think I'm gonna have to +1 about the contrast. Especially on Chrome Silver. I bet they will look alot better after the drop though.
they arent bad but I'm just not feeling it. But theres guys on here that run Volks that I dont like either so dont feel too bad. I think I'm gonna have to +1 about the contrast. Especially on Chrome Silver. I bet they will look alot better after the drop though.
you didnt hurt my feelings lol i take all opinions with a grain of salt im happy with them and thats actually all that matters . Any advice on what front camber kit to buy? I should have springs by end of next week so i think it will look alot better then.
. Any advice on what front camber kit to buy? I should have springs by end of next week so i think it will look alot better then.
yeah i hate dealers im just waitin till my front bumper is a little more chewed up before i replace it or get it refinished. Yeah im lookin at the eibach's too BJ at vivid gave me a good quote on some sways and springs so might have to go that way. thanks for the kind words fellas.
i have tanabae's and i just love my drop i don't scrap on anything but still maintaing a low look. I would go with the spc front camber kit it has alot of adjustment points so you can get your aligment done exactly how you want it.
