What's the consensus on widest and lowest offset wheels you can run on the Z? I've seen 9.5 +22 and 10.5 +22 TEs, but someone mentioned these aren't correct for the car and I want to know why because those were the sizes I plan to run. Also, what are the average tire sizes you guys are running, thanks!

 

The 9.5 +22 and 10.5 +22 are correct as reccomended by Volk, the only catch is you'll need to roll the fender in the rear to accomodate the rim. I have this setup as do a few other people on this forum. It's a perfect setup, sits perfectly flush with the fender, and looks great with the deep dish in hte rear with hte 10.5's

 

It will still need rolling if going with a 275 stretched over a 10.5? That's pretty aggressive. Don't want to roll the M's fenders either but barely made the 10s fit. Any pics of this setup would be appreciated!

 

Here's a pic of john350z's car who has the exact setup as i do.

 

What exactly does the term "Roll the fender" mean?

 

Folding up the inner lip in the fender well so it doesn't rub on the tire. Cheap alternative to tubbing it.