Tires and VDC
03-10-2008, 05:13 PM
#1
Registered User
Thread Starter
Join Date: Jan 2008
Location: Canada
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Tires and VDC
hey guys, I've done some searching and can't really find any answers to my question regarding VDC and tire sizes.
I'm planning to run:
275/35/18 Rears
245/40/18 Fronts
in the Falken RT-615
The tire diameter is pretty much the same, but some people are telling me they've had problems with Falkin 615s causing some VDC issues.
Any help is appreciated!
Thanks!
I'm planning to run:
275/35/18 Rears
245/40/18 Fronts
in the Falken RT-615
The tire diameter is pretty much the same, but some people are telling me they've had problems with Falkin 615s causing some VDC issues.
Any help is appreciated!
Thanks!
03-10-2008, 05:29 PM
#2
New Member
If you have VDC, your rear tire selection (275/35-18") is too short. If you go with that rear tire size, you can expect problems with VDC (especially when you push the car).
--Spike
--Spike
03-11-2008, 12:43 PM
#5
Administrator
iTrader: (25)
Originally Posted by DavesZ#3
Wrong tire sizing/height is a common cause of VDC problems. Make a good selection and you'll have no problems.
I've personally ran 19x8.5 // 19x10.5
245/35 fronts with 285/30 rears
235/35 fronts with 275/30 rears
No problems with this set up. It's on 19's though...
Thread
Thread Starter
Forum
Replies
Last Post
Tonyz_2004_350z
South East Marketplace
1
10-04-2015 12:53 PM