17X10 Front and Rear for autocross?
Thanks for the update on the current street tires. About what I thought. I drive the A032s now on the street and have done some track (road coarse) on them. They are darty - this is always the case with R compound. I agree about the traction. I have Toyo RA-1s on the Miata and they crank, but Toyo's are not discounted. I may buy the Enkie's with the A032s again to get the package discount from DTD and then go Toyo next time.
As far as the 16" wheels and tires - I completely agree! I used to run a second generation RX-7 in CSP with 13x9 wheels and I use to place at national events. From 15" to the 13", I dropped my overall rotational inertia of the drivetrain by 70%. There are some choices for tires in 16" which is about the only even sized tires available. BSP is a tough class, street prepared gets very strange at the top levels. Car prep can go beyond prepared class at national the level. Good luck.
As far as the 16" wheels and tires - I completely agree! I used to run a second generation RX-7 in CSP with 13x9 wheels and I use to place at national events. From 15" to the 13", I dropped my overall rotational inertia of the drivetrain by 70%. There are some choices for tires in 16" which is about the only even sized tires available. BSP is a tough class, street prepared gets very strange at the top levels. Car prep can go beyond prepared class at national the level. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
Aug 6, 2021 06:19 AM




