same as gabe3d! but i added a 5-mm spacer up front and a 4-mm out back...

so offsets are +10 and +11.

with 245/35 and 275/35 nitto neogens.

 

stock suspension.

 

Hi I need help

I want to put into my 350z rims Kranze Bazreia 19" front wheel with a outer rim 105mm and 130mm on the rear axle. I do not know what width should I look for and what type of disk(s-low,low,mid,hi) offset + or - to the brembo calipers.

I come from Poland. Here goes few cars that have the wheel. Please, any advice and sorry for my bad English

 

I'm sorry...are you talking about the distance from the mounting point to the outer edge of the rim when you say 105mm & 130mm?

I am under the impression that the bbk's out there are rather set...perhaps you want to know which is the largest bbk that will fit with those rims?

I think someone here will be able to answer your question without any further information, but is there any way you could clarify your question? I'm only trying to help clarify this so perhaps others could answer.

 

Sorry, the trouble is that I do have a factory fited brembo's on my car and I want to buy thoess wheel - Kranze, model Bazreia.

Now the problem is that i don't know wich DISK TYPE and ET I should choose to fit the car without the problem with hiting callipers. 105 and 130mm is the dish depth and diameter is 19".

http://kranze.jp/english/bazreia.html (link to the rims)

To make it clearer i will atatch a link to the car with thoes wheels fited but his callipers are stock non brembo's so can't use his rims specs...

http://fatlace.com/cars/hellaflush/d...50-from-texas/

 

Thread merged with existing Weds thread to assist you with your question.

 

Just stepped up to my first pair of legit wheels, SA-60M's. 18x10 +20, Cannot WAIT to put these on the car!!



Definitely going to post up pictures once they're on the car, especially considering with all of my searching I was only able to find one picture of them on a Z, and it was a stock ride height Z... Photos cannot do the color of these wheels justice. :bow: to Weds.

Got them on yesterday. Only got to take instagram pics because when I finally got them on it was getting dark. These wheels are super super rad.







Better pictures later on. 18x10 +20 all around with 15mm spacer in the rear, 20mm or 25mm spacer up front, can't remember

 

@Deedilus I just came across these wheels a couple days ago. They are freakin sweet. I might have to pick me up a set when I return from Afghanistan.

 

http://s70.photobucket.com/albums/i1...rent=zpic2.jpg
one of my favs

 

My Z with Weds Kranze Bazreia's!

 

Weds Kranze Borphes

 

WedsSport tc105n
Front 18x9.5 +10 255/40
Rear 18x10.5 +12 275/40

 

Just a tease of whats to come...

<a href="http://s9.photobucket.com/user/Chrispuig/media/350Z%20Project/photo1-1.jpg.html" target="_blank"><img src="http://i9.photobucket.com/albums/a52/Chrispuig/350Z%20Project/photo1-1.jpg" border="0" alt=" photo photo1-1.jpg"/></a>

 

Old Pic of my car.

TC105N

F: 18x9.5 +10. -13 after spacers with 235/40/18
R:18x10.5 +12. -6 after spacers with 255/35/18

 

Looking good tburner! Quick question. Where you able to transfer the TPMS over from the stock wheels to the TC105n's?

 

Anyone have any recommendations of a place to purchase Weds Kranze center caps?

Oh, and this is a report from the other thread, but at least it's still a contribution to the thread haha. This is my car on Weds Kranze LXZ. 18x10.5 -4 18x11.5 -16~~(could be more, still unsure lol)

 

Thank you

I have a base Z (no tpms)

 

Mine works fine on all 4 wheels. I have a touring model btw.

 

Oh, I see.

Awesome, thanks!

 

Bringing this thread back from the dead.

Just bought a set of these guys: