hey guys,
Is it OK for now to run my stock lugs with my work s1's? Not running any spacers.

Also, does anyone have any review about the Muteki Semi Extended Lug Nuts SR35? I bought a set of the regular muteki lug nuts and the coating on those just came right after when you torqued them down. Was wondering if the sr35 had the same problem.

Thanks

 

Maybe:

a. Does the bottom of the lug nut fit the wheel properly? Cone to cone. Or flat to flat.
b. Is there sufficient thread on the stud to secure the wheel properly?
c. Does the inside of the lug nut bottom out on the stud?

 

I use the sr48's on my S1's and like em (very good quality imo) the oem lugs will work but you chance messing up the finish around the lug hole's when useing a socket or lug wrench. For what you paid for the wheels you may as well spend the 60-100 bucks for a good set of lug's.

 

Thanks. Guess I won't be taking chances on the finish. Muteki here i come!