BIG LIPPED Question
This is why this forum has a search function.
hey whats up? i got a question. What the biggest size lip i can put on the rear of the car, thats reasonable with out havin to do alot of mods or anything? im not really tryin to pay 5Gs for a set of rims either. the Z is the first rearwheel drive car i have owned so im pretty new to this everything else was dsm's an hondas 
also whats the best way to slam with out airshocks or coilvers that cost 2G's? all the spings i have seen only lower like 0.8"s
someone please point me in the right direction with some rim choices an such
Thanks
also whats the best way to slam with out airshocks or coilvers that cost 2G's? all the spings i have seen only lower like 0.8"s
someone please point me in the right direction with some rim choices an such
Thanks
You can easily get a set of BC coilovers for around $1050 shipped that will get your car pretty low.
Thread Starter
Registered User
Joined: Sep 2008
Posts: 21
Likes: 0
From: Va
i like the Piaa Super Rozza rims but the only other Z in town has a set an im not tryin to be like the bopsi twins an have the same rims, i like clean looking wheels, 5 stars split 5's nothing to gawdy. the lowest springs i have found are like 1.2" im pretty sure i can go lower then that i have more gap then that now on my 19"s
p.s. thanks for the people who posted pics of thier set ups. it gives me reat motivation
thought about these they are like the Piaa's scrawy step brother
only a 3.5" lip on the rear on a 19" tho id like to go bigger
p.s. thanks for the people who posted pics of thier set ups. it gives me reat motivation
thought about these they are like the Piaa's scrawy step brother
only a 3.5" lip on the rear on a 19" tho id like to go bigger
Last edited by Cr33pinZ; Dec 11, 2008 at 10:51 AM.
i like the Piaa Super Rozza rims but the only other Z in town has a set an im not tryin to be like the bopsi twins an have the same rims, i like clean looking wheels, 5 stars split 5's nothing to gawdy. the lowest springs i have found are like 1.2" im pretty sure i can go lower then that i have more gap then that now on my 19"s
p.s. thanks for the people who posted pics of thier set ups. it gives me reat motivation
thought about these they are like the Piaa's scrawy step brother
only a 3.5" lip on the rear on a 19" tho id like to go bigger
p.s. thanks for the people who posted pics of thier set ups. it gives me reat motivation
thought about these they are like the Piaa's scrawy step brother
only a 3.5" lip on the rear on a 19" tho id like to go bigger
The Z can definitely accommodate a nice lip if desired. Keep in mind if you are going to go with a BBK or not because clearances will become an issue then. It's all about manipulating:
-camber
-ride height
-Wheel size
-Wheel width
-Wheel design
-offset
-Brake setup
-Tire brand
-Tire size
Spending money to get a custom wheel is always the best choice if you want the best effect. Here is a link to a thread I started about Brake Caliper/wheel clearance:
https://my350z.com/forum/brakes-susp...clearance.html
-camber
-ride height
-Wheel size
-Wheel width
-Wheel design
-offset
-Brake setup
-Tire brand
-Tire size
Spending money to get a custom wheel is always the best choice if you want the best effect. Here is a link to a thread I started about Brake Caliper/wheel clearance:
https://my350z.com/forum/brakes-susp...clearance.html
Last edited by Rickdogg; Dec 11, 2008 at 02:51 PM.
Thread Starter
Registered User
Joined: Sep 2008
Posts: 21
Likes: 0
From: Va
i belive im gonna have my GF order me some lowerin springs an some of the nismo floor mats i found on this site for Xmas i guess i could save up until i find the rims i want i already got custom 19"s on thier so its not like im ridin stock......
i guess i could save up until i find the rims i want i already got custom 19"s on thier so its not like im ridin stock......
Thread Starter
Registered User
Joined: Sep 2008
Posts: 21
Likes: 0
From: Va
its b e a utiful
