Will 18 x 9.5 / 10.5's fit without needing to roll the fenders?

thanks!

 

OFFSETS?

 

I dont know what offset either!

But i want 18 / VOlk TE-37's

i know everyone and their mother has them on here..

 

Sorry to highjack this thread but could someone also state what offset with 18x9 and 19x10 Volk/Rays wheel that can be had that will not rub I am looking for some serious rear lip........

Stupid question but will the offset change how much lip there will be I have been told yes and no.


BTW KONVERTOR, 18x9.5 and 18x10.5 WILL fit its a matter of offset there are ppl in the wheel gallery that have them, they run 22 rear, but differ in choice for the front.

 

thanks will look...

 

18x10.5" will fit without rubbing if the car is not lowered, if you lower the car you should roll the fender. As far as 19x10"s go, I would think a +25 offset should barely fit without rubbing.

 

How will these fit with stock suspension

19 X 9.5, +22 F
19 X 10.5, +22 R

and what about with a nismo g-attack

 

19x9.5 will fit fine in front. You can run up to 275 with no problem.
19x10.5 in the rear with 275 will fit OK with stock suspension. Fender doesn't need to be modified. If you want to run 285 or 295, then you'll have to roll the fender.

 

I WANT 18's not 19's!

What offset will i need for 18's front and back 9.5 / 10.5

thankie

 

offset will be the same whether 18" or 19".

 

9.5f 10.5 r with +22/+25 all around would work just fine. +25 rear could get a round shouldered 295 without rolling the fender.