New wheels on my PPW hr
Thread Starter
Registered User
iTrader: (5)
Joined: Oct 2008
Posts: 263
Likes: 0
From: Sunnyvale/Davis, CA
This is my first time posting pics of my car because I finally got some wheels. They are rota torques 18x9.5 +20 offset all around with 275/35/18. I know I need to lower and was thinking about some tanabe gf210's but im scared I will rub upfront. If anyone with similar setup could chime in with their setups that would be great. Sorry for the crappy pic but this was all I could get at the time.

NEW PICS! Finally got lowered on Eibach Prokit.

NEW PICS! Finally got lowered on Eibach Prokit.
Last edited by jkim824; Nov 8, 2009 at 02:16 PM.
Trending Topics
Looks great , but i would do Cobb springs as the spring rates are much better, not to mention much better matched to your 08 shocks. I also would have done a 275/40 in the rear, unless it was my track setup.
Looking good! We have a lot of customers running 18x9.5 +20 non staggered wheels (Torque, Grid, P45R, etc..) with a 275/35/18's all around and the majority never have any rubbing. It ultimately depends on the tire model and also your ride height, if you aren't lowering the car too much then you shouldn't have any rubbing 
Here's forum member "thekinn" with your same wheel/tire setup (Rota Torque's in 18x9.5 +20 and 275/35/18's) and Cobb lowering springs

By the way, did you get your wheel/tire setup from Gio (Glex25)? He used to run the same setup on his G35
-Dan

Here's forum member "thekinn" with your same wheel/tire setup (Rota Torque's in 18x9.5 +20 and 275/35/18's) and Cobb lowering springs

By the way, did you get your wheel/tire setup from Gio (Glex25)? He used to run the same setup on his G35

-Dan







