Hy Z-Freaks

again sorry for my bad english


im searching wheels with:
• a real BIG lip depth ca. 5" or more
• cheap (2000-2500$, without tires)
• not too heavy
• 19"
• must look good on a gray 350z

i know its near impossible to find a wheel that has all that...
i want to stretch the tires and for the 1st i has to look sick on the car and have a good drivability...and it has to be cheap and 19" and if its possible not too heavy...

can anyone help me?

thx for your feedback!

cheers,
luca

 

hey, i have a set of weds with a big lip in the rear. the rear is 18x11.5 i know u were looking for 19's but i fu are interested send me your e-mail a nd i'll send u pics

 

hy BlueBallZ

thx...you have a PM...

hope to become other suggestions...i really like more 19"...

thx for other feedbacks...

luca

 

Search around the marketplace.

 

allready done...the problem is...im from switzerland and here are many who want ship to switzerland...

 

with a budget of $2,000-2,500 you should have no problem finding what you are looking for

 

the tsw thruxtons have a 5 inch lip and are pretty cheap. But you have to get 20's for the 5 in. lip, and they're pretty damn heavy

 

^tsw is gay, and their offset sucks

if you want dish, search for used work,ssr,ame,weds, etc wheels. Try on zilvia and other forums. not many brands make a true 5 in lip so it wont be an easy find for your exact price

my wheels im ordering in a week have a 5.7 inch lip, woo hooo

 

DAMN its very hard to find anything...

are there no other wheels with deep dish? Just the TSW?

 

Look at the Work VSXX wheels. I have a 4 in lip in the front and nearly 6 in lip in the back.

 

thx i like the Work VSXX

But New they are too expensive...and at the moment i cant find any cheaper one...

 

did you check in the used section here? this is a good time to look since everyone wants a different look for summer time

 

hy...allready looked there...there are 1,2 wheels which i like...i wrote them but heared nothing...

but i am looking now with mark from ravspeconline.com... he makes me any offers for work wheels... a good guy, very good service!

luca

 

well good luck OP, hope you find what you're looking for

 

do you mean that ironical?

 

go to www.venaciwheels.com. I was told those wheels are available for around $2500 and you can get 19x11 in the rear with a 5" lip.

 

nope, i actually was telling you good luck

 

I got my works for 2000 used and they have fairly good sized lips at 19x10 and 19x11 +10 all around. You should have no problem, just keep your eye out for a used set.

 

THX Peopelz!

I have wrote to vipstatus...Venaci in 19" hast just 4" lip...

I think i go with the Work Varianze...but also there just 94mm Lip...
i dont want to fit cambers etc...just roll in the lip and lowering the car...

its important for me that i have a very good driveability! So i think i go best with Work wheels and this dimensions:

Work Varianza T1S
Front: 19x9.5 + 17
Back: 19x11 + 15

Luca