I'm on the fence before I order some wheels. I want to run 10.5 all around but I'm more concerned about front fitment and how wide of tire I can run at the front or should I play it safe and order 19x9.5 +12 for the fronts.

The goal is to run 10.5 wides for the fronts w/ either 255/35 or 275/35 as the front tires without touching any body panels and just have slight camber nothing extreme.

any info would be great, thanks!

 

I had 19x10 +20 on all four corners with 275 35's and the fronts stuck out a bit too far for my liking, but to each is own. Have you already bought them?

 

It all depends on how low your car is...post pictures

 

the jlines are 18's on coils. I wouldn't want to go any lower then that since I already bottom out daily driving.

I havent ordered them yet but I would want to soon since it would take 1-3 weeks to get from rays and 4-6 weeks to get get it in my hands but I can wait since I have a set of 18x9.5 +12 and 18x10.5 +15 coming in soon. Worst case scenario i'll test fit the 10.5 when they come and see how it is and goes from there.

 

I'm running a 20x10.5 +24 in the front and I bearly clear the suspension... I'm also lowered 1"... I think you'll be fine with a 19x10.5 +15... A 275 tire will be a slight stretch so that gives you more room to clear the fender... But if your going to a square setup, I think the front will poke out more than the rear... I could be wrong tho...

 

3 mm is going to make a significant difference?