Volk TE37 Thread
#1162
Registered User
#1164
Club Moderator
the Hot Spot
the Hot Spot
iTrader: (1)
Adding spacers is a personal preference. I've never dealt with spacers before but the biggest spacers I would add is 10mm, which is probably use to clear brake kits only.
15, 20, 25mm spacers are too big IMO and I would rather have a minor sunken look than to put a big *** spacer to make up for it. Just buy new wheels with the correct width and offset if that's the case.
15, 20, 25mm spacers are too big IMO and I would rather have a minor sunken look than to put a big *** spacer to make up for it. Just buy new wheels with the correct width and offset if that's the case.
#1165
Toasty
iTrader: (4)
Normally I'd say you can leave +22 wheels up front without a spacer (I'm currently doing it, 9.5 wide wheel with 255 tire though), but in your case the difference from front to rear due to the +12 rear offset is fairly significant. Just a suggestion.
Last edited by Phenom; 07-24-2014 at 08:21 AM.
#1172
Registered User
Adding spacers is a personal preference. I've never dealt with spacers before but the biggest spacers I would add is 10mm, which is probably use to clear brake kits only.
15, 20, 25mm spacers are too big IMO and I would rather have a minor sunken look than to put a big *** spacer to make up for it. Just buy new wheels with the correct width and offset if that's the case.
15, 20, 25mm spacers are too big IMO and I would rather have a minor sunken look than to put a big *** spacer to make up for it. Just buy new wheels with the correct width and offset if that's the case.
I agree. I went on a little photoshoot and it became a lot more obvious. I'll start shopping for spacers soon.
#1174
Registered User
Join Date: Jul 2014
Location: Troy, MI
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Ugh, sorry the pic didnt show up. Click this link for the Z. http://wallpaper-download.net/cars-w...350z-wallpaper
#1177
Registered User
Join Date: Jul 2014
Location: Troy, MI
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I realized after taking another close look at them. Oh well, Im going with Varrstoen ES2's in white to replicate them. Wish me luck
#1180
Registered User
Join Date: Jul 2014
Location: Troy, MI
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts