Slick 6MT

iTrader: (13)

I've been a huge fan of these for ~13 years and thinking of picking up a set of 18s for my car. I've never seen them mounted on a G/Z and would like to see what they look like before I pull the trigger.

If anyone has some pics I'd greatly appreciate it!


Thanks,
Anthony

davidv

iTrader: (2)

Never heard or seen them. You will be first. A pioneer of sorts. A trailblazer.

sdZ33

iTrader: (39)

I don't think it will look good...

DavesZ#3

iTrader: (26)

They remind me of some TE37 wheels. Based on the couple of posts I read, you might have a hard time finding them in the size and offset that would work on a 350. They seem to be designed for smaller cars like the Hondas or 240SX.

datsunHEAD

iTrader: (17)

great wheel and design, but the Z/G is such a big bodied car that these rims would just look tiny,even if they made 19inch

quakerroatmeal

iTrader: (9)

Great wheels for the Honda/Acura's. Not sure if they'd be good for the Z/G.

vex008

iTrader: (4)

EVOs only came as large as 17"
Desmond Marquis Promada Regamaster came in 18x10.5
There was a R32 cruising around with them with a "decent" offset, not aggressive by todays standards but it looked good. Think a hurricane took away the car and wheels.

similar setup to this but the car was that dark grey and the wheels were all white pcd


PS: I want a set of EVOs in 16s for my EF9

Flo-ridaZ33

iTrader: (60)

They were a big hit with Z32's back in Japan... and yes to add to what you said, they dont come in the offsets that a Z33 requires.

Slick 6MT

iTrader: (13)

Anyone?

Flo-ridaZ33

iTrader: (60)

If you havent noticed by now... there's no pics of Z's with them.

Slick 6MT

iTrader: (13)

You're right. I'm sure every member of My350Z.com has looked at this thread.

I bumped it to get more views and get the attention of more people...

Flo-ridaZ33

iTrader: (60)

Ok... I'll bump it again only b/c I've never seen them, I'm a wheel *****.

my350isblack

iTrader: (6)

it wont fit

lgear080

iTrader: (21)

http://cgi.ebay.com/ebaymotors/Matte...ht_3001wt_1167

+20mm spacers and done

http://cgi.ebay.com/ebaymotors/Gloss...ht_6032wt_1167

+30mm spacers and done

http://cgi.ebay.com/ebaymotors/JDM-R...ht_2398wt_1167

nipple caps for effect

Flo-ridaZ33

iTrader: (60)

^nipple caps FTW...

Slick 6MT

iTrader: (13)

I know where to get them! I'm close to picking up a pair of 18x9.5 +18 for the fronts. I'd like to see some pics of them mounted on a G/Z but it's looking like I may have to be the first...

Slick 6MT

iTrader: (13)

Here's a chop. (thanks Calvin)





I think it looks like hot fire...

Flo-ridaZ33

iTrader: (60)

hmmmm....

lgear080

iTrader: (21)

18" is too small for g35....