Bmurray350z

iTrader: (34)

teeohfosho, looks good. a drop and spacers will bring it to life

teeohfosho

yeeeeup plasti-dipped errthangg its pretty dope

teeohfosho

bro i cant wait. Stance gr+ oem, 15mm spacer back 10 up front. kinetix upper a arms and i already bought an spc rear camber kit. AHHH CANT WAIT

kaio007

iTrader: (8)

Hey, I have a question, I have been looking around for some aggressive wheels. I think I may settle on some Vorrstoen 2.2.2's....
I have a Brickyard Red 350z.. so I am thinking
Either Hyper Black, Matt black, White, or maybe Transparent Red (not likely tho).

If I go black, in your opinion, should I get Hyper black or matt black? (not sure of the difference).

Secondly, I am trying to figure out which offset to go with (as I do want an aggressive stance).

My Z is dropped onTein MasterFlex coilovers with EDFC, SPC F&R camber kits, and the front and rear fenders are rolled (rear is possibly pulled a lil).

The prior owner had 19" RAYS Gram Lights 57s Pro's on my car and those specs were 19x9.5 +10 front and 19x10 -15 on rear with 235 tires streched all the way around. So......

Should I go with + 12 (and maybe get a spacer for the rear?, if so, what size?)
or
Should I go with +0 ( and hope there are no rubbing issues in the front)

I'd rather not have to find someone to pull my front fenders out a lil... so just looking for others opinions.

Thanks!!!! very much!

DjTyfightr

iTrader: (3)

all depends how low you are and if you want stretched tires or not

Donati06Z

iTrader: (1)

little ps fun

kaio007

iTrader: (8)

I don't know much about tires nor streching, but would assume I would go with 225/35/19 and 245/35/19 as that seems common (?)... probably do more research after I decide on offsets, even if that is *** backwards.

Here is a pic of the old wheels on my car if that helps justify my ride height.



Thanks for any help/opinions in advance!

KenE_Z

Nice whip teeohfosho.

Exactlly what i was searching for before i make my purchase on the varrstoens. Are those 18x9.5 +22 all around?

DjTyfightr

iTrader: (3)

all depends what your going for, but i wouldnt put a 245/35 on the back if you plan to keep it at that height(not low enough for it imo)

kaio007

iTrader: (8)

Hey man, thanks for your input. What would you suggest for tire size in the rear? I think I may have meant 245/35/19 in front and 275/35/19 in rear. But I was looking at too many things at once and wrote the wrong specs. Do you think I would be good to sport +0 all around or should I go +12 and get a spacer in the rear? VERY MUCH Appreciate your help!

Although I am currently at work, did some quick researching and found this:
http://www.rimtuck.com/search/thumbn...=03&yearto=07&

Think I am going to go with +12 offsets with 245/35/19 in front and 275/35/19 in rear and I think that may look good with my drop and F&R camber kits. I am already rolled all the way around and slightly pulled in back so no rubbing issues I believe.. just wasn't sure what difference the +0 would pose.

DjTyfightr

iTrader: (3)

if you want the 245/275 setup then you have to get +12 because it wont fit on a +0

teeohfosho

Thanks bro. It's 19x9.5 in the front and 19x10.5 in the rear +22 offset all around

KenE_Z

Very nice. As it relates to handling, how are they performing. Also any notice on performance loss? I know its a common setup just have been curious with putting the 10.5 on a stock Z.

I finally had the time to purchase them from Navith @ Varrstoen, great information from him. I went with the 18x9.5F +12/10.5R +15 hyper black. I will hopefully have no regret.

Ken

Midnight_Slide

iTrader: (1)

Hey dude, what are your wheel spec's and tire specs? also what you dropped on? I love this look.

Aggressive but fills the wheel wells.
Not low but looks mean!

teeohfosho

Yeah man everyone there was really nice and they had some sick bmws dropped with varrs there that was too sick. but yeah man you should enjoy them i haven't noticed anything bad about them lovin them a lot and you should enjoy them as well

JDMStanced

iTrader: (16)

Those of you who has varrs 2.2.2 matte black, where did the tire shop mount the shiny weights to balance the wheels? lol

i recently picked these up and got the tires mounted and balanced. Two of the rims have the weights close to the rims face...which can be seen from outside

teeohfosho

yeah thats exactly how mine are and i wondered the same thing but im over it its not too big of a deal if anything plastidip the weights if you're really bothered that much about it

JDMStanced

iTrader: (16)

i completely forgot about plastidip! lol
thanks

freedonutss

iTrader: (14)

Anyone running a square setup of 19x10.5 +12, 275/35/19? Will they fit lowered on GF210s?

DjTyfightr

iTrader: (3)

some quick shots