I been looking on this forumn with this wheel set up but haven't found any specs. What are the specs on these wheels and tires? Does anyone know?

 

the guys name is Chris Foreman... im not sure if he is a member on here but here are some specs on the wheels 19x9.5 -30 with 30mm spacers. 19x10.5 -40 with 40mm spacers. not sure about the tires though.

 

40mm spacers? hell no lol that's scary

 

http://varrstoen.com/news/nissan-350z-z33/

look to be 30mm spacers according to the blog post on varrstoen. Not going to pull those off with without major camber and an extensive quarter/fender pull or widebody

 

The place you took yours to get coated... did they coat over the original paint or had it fully stripped to bare aluminum first and then powder coated? Those are the correct steps into refinishing the wheels. Powder coat will withstand better than paint.

 

I gave her some new shoes today.

Tanabe gf4210
Varrstoen 2.2.2 19x10.5 +12 x4
245/40/F
275/35/R

 

^^^^^^ Zticky ^^^^^^^^ car and pics look great. got any pics looking down the side. curious about how flush they are with those springs. thanks

 

Thank you. I dont have any side view pics yet, but when i take some more ill make sure and do that. Its no super flush it still has bout half inch to be FLUSH. Im happy with it tho for just springs.

 

I just got my wheels in today and testing them if they would fit the front wheels dont go on because there is no cut for the bolt thats on the hub. Did anyone else have this issue? The wheels are the ce28n replicas if that helps

 

You Remove That Bolt.

Its Only There To Make Sure you Don't Put Your Rear Wheels in the Front.

 

Ok thanks just making sure.

 

update 18x9.5 +22 on all four corners. rear might need some spacers. lowered on gf210 springs by tanabe

 

New Shoes, should have High Quality pics shortly

 

Wheels Size? please

 

Front-19x9.5+0 225/35/19
Rear-19x11+0 265/35/19

 

Did you pull the rear fenders?

 

I am looking at 19X9.5/10.5 VARRSTOEN ES222 WHEELS with +30MM offset on the front and back, and it looks like they will sit flush w/o fender rolling.

I am not a fan of spacers or stretched tires so I was wondering if anyone else has gone with this offset? If so, what tire sizes?

Here is a link to their EBAY page and they have some pics that show a nice flush on the rims.

http://www.ebay.com/itm/19X9-5-10-5-...sories&vxp=mtr

 

those offsets will not be flush. you need at least the +12 offset for it to be flush. tire sizes will play a role in the "flushness" as well.

 

How about the +22mm on front and back?

http://www.ebay.com/itm/19X9-5-10-5-...de7e80&vxp=mtr

These should stick out a little more than +30mm, but the web page recommends fender rolling.

 

+22 doesn't require fender rolling. it will not be as flush as +12. but will look good.