can you run 19" x 9.5" front +4
19" x 10.5 " rear +4
350z
1.5" drop front and rear
235-35-19 front
255-35-19 rear

with no roll , and no pull

and not rub

 

1/2 cup all-purpose flour
1 teaspoon dry mustard
1 teaspoon seasoning salt
4 thick cut pork chops
2 tablespoons olive oil


It's all good.

 

i am hungry that sounds nice

work for lamb chop to , or just pork chop, how about veal chop

 

it will work it may or may not rub depends on your camber... just get your fenders rolled its cheap and harmless

 

I'm guessing a roll.

I don't know why people who are scared try to run low offsets.

 

^ +1

 

We did this in July but thanks for asking: https://my350z.com/forum/wheels-and-...se-thanks.html

 

the rears will need a roll. front you might get away with if you are running a narrow tire. i'm running a similar set up.

 

since that post in July the tire size has changed from that size
since that post July the offset has changed

thanks though

i remember what i asked then

 

okay guys thanks
gathering that the rear will need to be rolled
and the camber will need to be very -

appreciated thank you

 

all fenders rolled or remove front liners... regardless of tire size.

where in FL?

 

camber wont have to be VERY neg once rolled. so do a good roll and run i would say about -2 to -3 AT MOST and you should be good to go

I have a 19x10.5" +15 offset with a 285 tire with a roll and pull and I am only running -1 camber and I have plenty of room to spare.

here is what it looks like. Remember I am rolled and PULLED

 

fronts come from factory rolled... you dont need to remove liners either. I ran 0 offset 9 inch rim with 245/35 tire and was perfectly fine

 

No.

 

boca raton

 

Fixed , and he could easily run real tires with those offsets 275/35-19 rear and 245/35 front with around -2 camber.

 

Fender rolling isn't that scary but some people get so nervous about it.

We should have a "will it rub" thread. LOL

 

We do.... Just pick any one of 1700.....

 

LOL

Maybe I should have said an "Official - Will It Rub?" thread.

 

that thread sounds dirty