think i could make these fit??
Feb 28, 2011 | 02:53 PM
Thread Starter
Joined: Oct 2007
Posts: 1,036
Likes: 1
From: Coraopolis, Pa
think i could make these fit??
im looking at these but im not too sure if id be able to fit them on the Z....thinking the offsets are just a bit too much, am i right?
i know id have to roll, and flair the fenders for sure...but would that even be enough??
im on Stance GR+
19x9 -8, 19x10.5 -8
Feb 28, 2011 | 03:01 PM
Joined: Aug 2009
Posts: 159
Likes: 0
From: Halifax, Nova Scotia, Canada
You have never been in the aggressive wheel/streched tire thread... ?? Those wheels have Nothing on some of the guys in there.
Feb 28, 2011 | 03:11 PM
Thread Starter
Joined: Oct 2007
Posts: 1,036
Likes: 1
From: Coraopolis, Pa
Quote:
Originally Posted by
Sodero
You have never been in the aggressive wheel/streched tire thread... ?? Those wheels have Nothing on some of the guys in there.
im on that a good bit...but still cant figure out if these will be retarded flush or if they will just be concervative flush haha...
i dont fully understand offsets...i know i can fit the wheel but the offset is what im concerned about
Feb 28, 2011 | 03:34 PM
Senior Super Moderator MY350Z.COM
Joined: Jan 2009
Posts: 7,287
Likes: 189
From: Eastern NC
You can also look at fitment pictures of 19x9.5/10.5 Varrstoens with 0 offsets. The front is less than 2mm difference in poke and the rear sticks out 8mm more than the Varrs.
Feb 28, 2011 | 03:35 PM
Joined: Jun 2004
Posts: 42,753
Likes: 11
From: Tucson, AZ
They look pretty good on the red car. All you need is some tires.
Feb 28, 2011 | 03:48 PM
Joined: Nov 2008
Posts: 835
Likes: 0
From: sacramento, ca
they'll fit easily up front with a roll. out back you'd need a roll and slight pull depending on the tire and camber. i'd suggest a 245/35 for the rear.
Feb 28, 2011 | 04:28 PM
Thread Starter
Joined: Oct 2007
Posts: 1,036
Likes: 1
From: Coraopolis, Pa
Quote:
Originally Posted by
Max-G
they'll fit easily up front with a roll. out back you'd need a roll and slight pull depending on the tire and camber. i'd suggest a 245/35 for the rear.
awesome...im going to make an offer on them now...
Feb 28, 2011 | 04:34 PM
Joined: Jan 2009
Posts: 8,235
Likes: 5
From: 15 mins from white house
Feb 28, 2011 | 05:45 PM
Thread Starter
Joined: Oct 2007
Posts: 1,036
Likes: 1
From: Coraopolis, Pa
Quote:
Originally Posted by
ZS14
Please don't do it
haha, dont like the Flush style i assume? haha...i like them and think with the centers pwdercoated gold, they should look pretty good..
im just waiting on a call back from the guy to see if he will take what i offered...
Feb 28, 2011 | 05:47 PM
Joined: Jun 2005
Posts: 13,654
Likes: 8
From: DFW
Quote:
Originally Posted by
Max-G
they'll fit easily up front with a roll. out back you'd need a roll and slight pull depending on the tire and camber. i'd suggest a 245/35 for the rear.
umm.. the fronts are rolled from the factory....
Feb 28, 2011 | 05:47 PM
Joined: Jan 2009
Posts: 8,235
Likes: 5
From: 15 mins from white house
no pproblem with the flush.... more VIP but hey its youre car the gold will look good.
Feb 28, 2011 | 05:49 PM
Thread Starter
Joined: Oct 2007
Posts: 1,036
Likes: 1
From: Coraopolis, Pa
Quote:
Originally Posted by
ZS14
no pproblem with the flush.... more VIP but hey its youre car the gold will look good.
your right, i guess i might find out if this guy ever gets back to me haha
thanks for the honest opinions tho
Feb 28, 2011 | 06:20 PM
Joined: Nov 2008
Posts: 835
Likes: 0
From: sacramento, ca
Quote:
Originally Posted by
Nexx
umm.. the fronts are rolled from the factory....
hahaha if you call that rolled...
Feb 28, 2011 | 06:25 PM
Joined: Jul 2008
Posts: 6,084
Likes: 1
From: Baton Rouge
Feb 28, 2011 | 06:42 PM
Joined: Nov 2008
Posts: 1,220
Likes: 0
From: lafayette, louisiana
225/35 front
245/35 rear (roll, no pull needed)
with coilover drop and no other mods it will sit PERFECT!
do it and post pics after
Feb 28, 2011 | 07:24 PM
Super Moderator MY350Z.COM
Joined: Jan 2007
Posts: 29,119
Likes: 2,400
From: Sin City
Quote:
Originally Posted by
theianmcdougall
225/35 front
245/35 rear (roll, no pull needed)
with coilover drop and no other mods it will sit PERFECT!
do it and post pics after
other than looking dumb rolling on really short tires with a wheel that sticks out lowrider style.
Feb 28, 2011 | 07:38 PM
Joined: May 2010
Posts: 274
Likes: 0
From: SoCal
im 19x9.5 -3 front 225/35, 19x10.5 -8 rear 245/35, only rolled the rear
Last edited by kemps; Feb 28, 2011 at 07:53 PM .
Feb 28, 2011 | 07:47 PM
Joined: Jan 2011
Posts: 179
Likes: 2
From: Vancouver, BC
These wheels should be a perfect fit on the Z that is slightly pulled. Don't let that picture of faux fitment on the FD fool you.
Feb 28, 2011 | 07:53 PM
Thread Starter
Joined: Oct 2007
Posts: 1,036
Likes: 1
From: Coraopolis, Pa
thanks guys, i think ima drop the hammer on them...guy just emailed me and said he'd take my offer...
Feb 28, 2011 | 08:08 PM
Joined: Nov 2008
Posts: 835
Likes: 0
From: sacramento, ca
Quote:
Originally Posted by
terrasmak
other than looking dumb rolling on really short tires with a wheel that sticks out lowrider style.
what? they're 19's. 225/35r19 is only .8" shorter than a 225/45r18.
think i could make these fit??
