Jan 2012 Clearance

Wheels (brand new): RAYS TE37SL 18x9.5 +22 / 18x10.5 +15 / 18x11.0 +18
Color: Press Graphite (Gun Metal with Cut Lip)

Wheels (brand new): RAYS TE37SL 18x10 +20 All Around
Color: Press Graphite

Wheels (brand new): RAYS TE37SL 18x11.0 +18 All Around
Color: Red

Wheels (brand new): RAYS TE37SL 19x9.5 +22 / 10.5 +22 / 19x11.0 +23
Color: Press Graphite (Gun Metal with Cut Lip)

Price: $3100 ~ $3900 Per Set // PM me

 

Quick bump

 

19x9.5 +22 / 19x10.5 +12 colors and best prices shipped to 28110. I see you have some listed in the ebay store

 

thanks for the inquiry

 

weekend bump

 

To the run in the spec Z series we need an 18x9 up front and 18x10 in the rear and they can't weigh less than 18.45lbs. Do you have the TE37SL that would fit these specs?

 

18x9.5 +22 / weight at 18 lbs. You can use heavier steel lug nuts to push it over 18.45 lbs.

18x10.5 +22 will weight around 18.5 lbs. so that meet ur need.

$3200 + $150 shipping. In stock. Thanks

Mark

 

No they have to be 18"x9.0" up front and 18"x10.0" in the rear.

 

Yes they do, but 18x9 will be lighter than 18.45 lbs. if u are ok with lighter wheel then we can order the 18x9 front. 8 weeks wait. 18x10 are in stock and also lighter than 18.45 lbs.

Btw, why do u need wheels that's heavier ?

 

It's the stupid rule that NASA put on wheel weights for the Spec Z series. There's a bunch of people with RPF1's that aren't sure if they can use their wheels or not also. What about just the regular TE37? We can't run a spacer that's very big either so would the offset work well without a spacer?

 

He needs wheels for the NASA Spec Z challenge, rules are stupid and require a max wheel size and minimum wheel weight. It's retarded

16 Wheel and Tires
16.1 Wheels
a) Any eighteen (18.00) inch diameter rim, with a maximum width of nine (9.00) inches front, and a
maximum width of ten (10.00) inches rear may be used.
b) No wheel permitted for competition use can weigh less than eighteen point five (18.50) pounds.
c) Wheels must be one piece. (i.e. No multi piece bolted, riveted, or welded wheels.)
d) Aftermarket wheel studs, lug nuts, and wheel spacers are permitted. If spacers are used they
shall be no greater than 13mm and equal per axle. Refer to Appendix A for recommended Nissan
Part(s).

Page 7 Section 16.1

http://www.nasaproracing.com/rules/s...rules_2012.pdf

 

Gotcha, stay away from TE and RE. Both will be 18lbs or lighter. Check the list below for available option.

In stock

SA55m 18x9 / 18x10 (19 lbs)
SA60M 18x9 / 18x10 (20 lbs)
Emotion XD9 18x9 / 18x10 (25 bs)

8 weeks wait

ADVAN RS, RZ - 18x9 / 18x10
Meister S1R

 

RAYS TE37SL (2)19x9.5 +22 / (2)19x11 +23 glossy black. shipped to 95127, thanks

 

sold out of the black already. I got the press graphite for $3850. LMK if interested

 

http://www.flickr.com/photos/jdmwheel/6947603801/http://www.flickr.com/photos/jdmwheel/6947603801/ by http://www.flickr.com/people/jdmwheel/, on Flickr

 

Hey there. do you still have the 18x11 +18 Mag Blues? What is the price? Is it local pick up only? PM me if you like. I'm scouring the web for these in mag blue, signing up for every forum where there is a set for sale, only to find out the are long gone. Tell me something different!

 

yup, I took the last set yesterday. There is a deposit on the wheel. Not pay in full yet.

Price at $3980. LMK if interested. Pick up.

 

Quick bump

 

List updated

 

TE37SL - 19x9.5 +22 / 10.5 +22 IN STOCK !!!!!

http://www.flickr.com/photos/jdmwheel/6964005450/http://www.flickr.com/photos/jdmwheel/6964005450/ by http://www.flickr.com/people/jdmwheel/, on Flickr

http://www.flickr.com/photos/jdmwheel/6964005310/http://www.flickr.com/photos/jdmwheel/6964005310/ by http://www.flickr.com/people/jdmwheel/, on Flickr

http://www.flickr.com/photos/jdmwheel/6964005100/http://www.flickr.com/photos/jdmwheel/6964005100/ by http://www.flickr.com/people/jdmwheel/, on Flickr