A little teaser for you guys/gals.

We have been working hard on the next project.

Avant Garde will be releasing a fully forged wheel line up.

AG. Function will be built with a purpose of being light and strong. They will be fully FEA tested and send to the standardized testing labs or STL in OH to be run through its paces to make sure it will take the abuse on the street and the track. Each 3 piece wheel will come with full race prep with spoke and back pad pocketing at no extra charge... The best part? Want titanium hardware but don't want to pay the extra 800 dollars a set for it? Well we listened and its included in the price for these wheels.

After the wheel is machined it gets shot peen and then an anodized coating to reduce any extra weight powder coat or paint may add.


First set that came out will be for a E90 M3
19x9.5 +22 20.25
19x10.5 +22 21 lbs.

The wheel going off to testing was a 19x8.5 +48 came in at 19.47lbs

This is for the F310 7 split spoke mesh. We are expecting the 5 spoke to be even lighter.

We will have a 7 spoke mesh a 5 spoke and a 10 spoke design.

Here are some pictures to hold you over till the first photoshoot.

We will have these in 18 19 and 20

Build time is 2-4 weeks.

We will be giving discounts to the first 5 sets for my350z member.

 

19x10 and 20x12 setup going on a Z06


http://www.flickr.com/photos/getyourwheels/6852795406/http://www.flickr.com/photos/getyourwheels/6852795406/ by http://www.flickr.com/people/getyourwheels/, on Flickr
http://www.flickr.com/photos/getyourwheels/6998918471/http://www.flickr.com/photos/getyourwheels/6998918471/ by http://www.flickr.com/people/getyourwheels/, on Flickr

 

Pretty impressive weight spec on the 19x10.5, similar to a Volk monoblock design in the same size. Curious to see some of these mounted to the aforementioned cars to get the full picture.

 

 

anymore pics of there other designs?

 

Can I get the one piece set in 18x10-33 and 18x12-20? How much shipped to 28227?

 

PM on its way 350zensokou

 

Here is the 10 spoke mono block

 

All Pm's replied.

 

Concave goodness!

http://www.flickr.com/photos/getyourwheels/7068061433/http://www.flickr.com/photos/getyourwheels/7068061433/ by http://www.flickr.com/people/getyourwheels/, on Flickr

 

 

All Pm's replied.

 

Brushed rose gold anyone?

 

They need to be priced lower to be actually competitive.. $3800 will get you spanking new Works or the like etc... just my .2 cents

 

Work wheels are mostly cast centers and are not made here in the US.

You also have to wait sometimes as long as 6 months.

As far as the three piece market here in the states our prices are well below anyone that is offering what we are offering. Our Function setup comes standard with spoke and pad pocketing (800 dollar option with almost everyone else) along with Titanium hardware (800-1200 dollar option with almost everyone else)

Not to mention our 19x9.5 for the M3 came out to 20.2lbs work wheels are not as light as that either.

 

All Pm's replied.

 

Avant garde makes top notch stuff, for sure. These are forged wheels and can't even being to imagine the quality. I have the M310's and they are phenomenal at least. Anyone who purchases these, is a very very lucky person.

 

Thanks for the kind words QuintonC!

 

 

Concave goodness!