I need help on some rim and tires. I am looking to get VMR v710 wheels. 19x9.5 all the way around. Do you think that they will be flush with the fenders? Also what are you guys opinions on tire size? I need all the feed back as possible.

 

A few helpful hints:

1) If you create a thread with a title like "Looking at VMR v710 19x9.5 wheels - need fitment and tire advice", you will have a better chance at getting help from the right people
2) If you create this thread in the "Wheels & Tires" sub forum, you will have a better chance at getting help from the right people
3) You'll want to read some of the FAQs and threads about fitment, offsets, alignment, etc - because there are a lot of factors that go into making a wheel sit flush and all of those things will play into it

 

Yup , they will look as good as you think they will.

 

Yes they will be flush.

 

ha. 9.5 square.. eesh.

make sure to get 35 offsets. hee hee.

 

I have these rims and if you are looking for more agrresuve look I would recommend getting the 19x11 for the rear.I mean the offsets aren't great and in had to run spacers to get my look. If you want to like a square go head but wouldn't do it. If you want some pics let me know

 

/closed from lack of searching...

OP, title your threads according to your content and read this entire thread:

https://my350z.com/forum/2003-2009-n...questions.html

Post #8 will give you the specs that you need to have it sit flush with the fenders. You can also search for "square setup"