Im looking at ditching my current setup of 20'' wheels(i bought the car with these wheels and spacers so im unsure of the offset) and looking at getting some rpf1s. Problem is i have 25mm spacers on the rear and 20mm spacers on the front. So my question is will i need to remove these spacers in order for the rpf1s to work? i was looking at the 18x9.5 with 15mm offset, I am also lowered about an 1"-1.5"

 

Spacers are not needed, remove them.

You may want the 10.5 +15 for the rear.

 

Would it be sticking too far out with spacers?

 

yes

 

Here is a picture of an Enkei 18x9.5" wheel with a 15 mm offset.



Answering your question: If you leave your spacers with a 15mm offset wheel, the tire will stick well outside the fender.

 

ok thanks