What's up everyone!

I decided to go with the 20x10 in the rear and 19x8 front....and I wanted to get a much profile possible(side-wall protection). So, I was wondering if anyone is currently running this setup, or if anyone had any opinions on if I would have rubbing issues (NO VDC and I'm NOT lowering the car)?

 

rubbing will depend on your offsets... if you're running +25 to +35 with that setup (in the rear), you'll be fine

as for tires... I believe 275/30/20 (not 35) is the correct size, but if you're looking for more sidewall, they offer 285/30/20 as well

the 275/35 will work but your car's going to look like a truck (half inch taller off the ground) unless you're lowering

good luck

 

I have 275/35/20 tires on my rear and a drop via Tein Flex. They will work, and look fine. You will not rub at all, even with a drop, as long as the drop is less than 1.5"

 

There are a few people running this size with their Axis wheels.