19" FS: 3pc Gold Workmeister S1's 10"/11" et -7... $1950
#1
Registered User
Thread Starter
iTrader: (3)
Join Date: Oct 2009
Location: Taxachusetts
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
3pc Gold Workmeister S1's 10"/11" et -7... $1950
***SOLD***
I have been selling these on and off for the last couple of months and am finally ready to cut my loses and get rid of them. The are Gold 3 peice S1's in 19x10 and 19x11 ET -7 / R-Disk so they are BBK Friendly. I purchased these new for for $3600 through Z1auto. these wheels are being sold in "repairable" condition. ** THEY WILL NEED TO BE DISASSEMBLED AND REPAIRED** I want to make that clear prior to any purchase. i will give a detailed description of each wheel in its current condition. They can be repaired for about $400-$600 or made to completely new wheels by purchasing new lips for about $1000 through VR Wheels. The centers and inner barrels are in new condition all around.
PASSENGER SIDE REAR:
The lip is straight all around, there is a rash that stretches about 1/2 to 3/4s of the outside lip. there is also very minimal oxidation from a wheel cleaner that was not too bare aluminum friendly. both can be cheaply and easily worked out.
PASSENGER SIDE FRONT:
The lip has a dent that i do not believe is repairable. It held air for close to 3 months and just recently started leaking after not driving on it. it is also very oxidized from the cleaner mentioned above. One this lip specifically it is not significant because it WILL NEED TO BE REPLACED!
DRIVER SIDE REAR:
The lip straight minus 2 VERY little dings and for the most part in good condition. has a minor rash on the outside and minor oxidation. both can be easily and cheaply worked out.
DRIVER SIDE FRONT:
The lip has one very very subtle flat spot in it. it is not noticeable to the average person or in photo. has probably the worst oxidation out of all 4 lips but still can be worked out easily and cheaply.
These wheels are what they are. to someone that can perform the work themselves or know a shop that can do this cheaply, these are a huge score for the price and avoiding the 6 month wait to receive from work. There are currently tires on the wheels that need to be replaced. i will include with sale however i only see it costing more in shipping. i will ship in the original boxes from WORK.
asking $1950 plus shipping and PP fees.
I have been selling these on and off for the last couple of months and am finally ready to cut my loses and get rid of them. The are Gold 3 peice S1's in 19x10 and 19x11 ET -7 / R-Disk so they are BBK Friendly. I purchased these new for for $3600 through Z1auto. these wheels are being sold in "repairable" condition. ** THEY WILL NEED TO BE DISASSEMBLED AND REPAIRED** I want to make that clear prior to any purchase. i will give a detailed description of each wheel in its current condition. They can be repaired for about $400-$600 or made to completely new wheels by purchasing new lips for about $1000 through VR Wheels. The centers and inner barrels are in new condition all around.
PASSENGER SIDE REAR:
The lip is straight all around, there is a rash that stretches about 1/2 to 3/4s of the outside lip. there is also very minimal oxidation from a wheel cleaner that was not too bare aluminum friendly. both can be cheaply and easily worked out.
PASSENGER SIDE FRONT:
The lip has a dent that i do not believe is repairable. It held air for close to 3 months and just recently started leaking after not driving on it. it is also very oxidized from the cleaner mentioned above. One this lip specifically it is not significant because it WILL NEED TO BE REPLACED!
DRIVER SIDE REAR:
The lip straight minus 2 VERY little dings and for the most part in good condition. has a minor rash on the outside and minor oxidation. both can be easily and cheaply worked out.
DRIVER SIDE FRONT:
The lip has one very very subtle flat spot in it. it is not noticeable to the average person or in photo. has probably the worst oxidation out of all 4 lips but still can be worked out easily and cheaply.
These wheels are what they are. to someone that can perform the work themselves or know a shop that can do this cheaply, these are a huge score for the price and avoiding the 6 month wait to receive from work. There are currently tires on the wheels that need to be replaced. i will include with sale however i only see it costing more in shipping. i will ship in the original boxes from WORK.
asking $1950 plus shipping and PP fees.
Last edited by scoupe; 08-25-2011 at 07:12 AM.
#2
Registered User
iTrader: (4)
Join Date: Aug 2008
Location: Northern VA
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
trade for wedssport tc105n with hankook rs'3s??
check my photobucket for pics:
http://s589.photobucket.com/albums/ss340/jeedup35/
check my photobucket for pics:
http://s589.photobucket.com/albums/ss340/jeedup35/
#7
Registered User
Thread Starter
iTrader: (3)
Join Date: Oct 2009
Location: Taxachusetts
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
no time, money or motivation. and if i did id wind up running them again and ruining them. you know the roads around here D&G.. let me know if your interested. id love to sell these locally
Trending Topics
#15
Registered User
iTrader: (11)
Join Date: Apr 2008
Location: Texas, Mass, Florida
Posts: 799
Likes: 0
Received 0 Likes
on
0 Posts
Do u not know how much they normally run for?!?!?! dude, that's already almost half the cost of those...
Scoupe..I have my SP1's already and it's gonna take sum work/money to make those work on my G...I did want them b4 but not sure i wanna deal with the hassle of getting them fixed...did VR wheels tell u when they wud be able to get u the new lips?
Scoupe..I have my SP1's already and it's gonna take sum work/money to make those work on my G...I did want them b4 but not sure i wanna deal with the hassle of getting them fixed...did VR wheels tell u when they wud be able to get u the new lips?
#16
New Member
iTrader: (15)
Do u not know how much they normally run for?!?!?! dude, that's already almost half the cost of those...
Scoupe..I have my SP1's already and it's gonna take sum work/money to make those work on my G...I did want them b4 but not sure i wanna deal with the hassle of getting them fixed...did VR wheels tell u when they wud be able to get u the new lips?
Scoupe..I have my SP1's already and it's gonna take sum work/money to make those work on my G...I did want them b4 but not sure i wanna deal with the hassle of getting them fixed...did VR wheels tell u when they wud be able to get u the new lips?
OP GLWS. If I had the extra money, I would definitely make you an offer.
#17
Registered User
Thread Starter
iTrader: (3)
Join Date: Oct 2009
Location: Taxachusetts
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Do u not know how much they normally run for?!?!?! dude, that's already almost half the cost of those...
Scoupe..I have my SP1's already and it's gonna take sum work/money to make those work on my G...I did want them b4 but not sure i wanna deal with the hassle of getting them fixed...did VR wheels tell u when they wud be able to get u the new lips?
Scoupe..I have my SP1's already and it's gonna take sum work/money to make those work on my G...I did want them b4 but not sure i wanna deal with the hassle of getting them fixed...did VR wheels tell u when they wud be able to get u the new lips?
yes VR said they have lips and for short money. under a grand for all.. grand for brand new meisters