20" FS: "NEW"!! Forgestar F14, 9.5@+7 / 12@+39, tires/tpms/BRONZE BURST ...CHEAP!!
03-28-2013, 08:29 AM
#1
350Z-holic
Thread Starter
iTrader: (16)
Join Date: Aug 2006
Location: Scottsdale/coyote drophouse
Posts: 8,213
Received 399 Likes
on
227 Posts
"NEW"!! Forgestar F14, 9.5@+7 / 12@+39, tires/tpms/BRONZE BURST ...CHEAP!!
Howdy,
I posted in regional but now have my username photo up, so im moving it to national forum.
Im not in dire need to sell, but I would like to buy an air bags set up for my vip car daily driver..
I have a set of mounted yet NEVER DRIVEN ON Forgestar F14s in bronze burst powder coat.
The tires Id say have 85-90% tread on them and no irregular wearing. They are surely a few eyars old, but consider them free w the wheels.
heres the specs:
20x9.5 +7 concave
20x12 +39 concave
tires are yokohama s Drives 255 30 20
and PIRELLI PZERO NERO 325 25 20..
they are an older tire but were extremely expensive. Again, consider them as free.
If you are willing to pay a reasonable price, i have a SPARE 325 ( as in extra 3rd)tire for you as well.
These include new and never before installed CF version billet center caps as well as my TPMS sensors in the rears (Not sure on battery life remaining but should be fine), and i will include the fronts as well, however they arent installed. Another fubar from the shop.
one wheel has some small scratches on one of the spoke faces, this is not into the metal or anything from curbing, its just because the shop that was working on my car doesnt care about my stuff apparently.
Forgestar says these should fit a 350z w negative camber in the front and a fender roll and pullin the rear.
A friends says he fit 20x10.5 +15 w negative camber up front.
[B] the math and fitment is on 100% you, just like any other time youre ordering wheels....i have accurately represented the wheel specs, the rest is up to you..
1400 bucks obo. Youd have to paypal this or do cash if your local.. so if youre offering less we need to speak on that.
shipping is available and can be discussed as well.
I have a local offer at 1200 cash....but man, im really throwing away brand new wheels here.
These are a few grand retail, and modbargains is the cheapest place selling these online now.. and for a standard set new they are 1800 dollars, with additonal change for 12 in wide and additional charge for Bronse color. Shipping is not included by them at that price. total cost for a set of these new and at a higly discounted price is 2050 plus shipping, most likely 165.. so total at the cheapest place you will find is still about 2200 bucks.. w out any tires.
heres the pics i have to show tire and wheel condition.
u can see the innners have no dirt of dust, = not used.
rear tires to show little wear.
They have not been driven on, and are "new", but hve been alive and on the car during a 2 year build.. indoor only. They are not curbed, they are pristinely clean inside the wheel barrel, and may have some light swirls here n there from never having been polished or realy cleaned or anything yet, i sprayed em down w glass cleeaner for the pics.. but we all know thats not ideal.. they will only look better w normal care.
I posted in regional but now have my username photo up, so im moving it to national forum.
Im not in dire need to sell, but I would like to buy an air bags set up for my vip car daily driver..
I have a set of mounted yet NEVER DRIVEN ON Forgestar F14s in bronze burst powder coat.
The tires Id say have 85-90% tread on them and no irregular wearing. They are surely a few eyars old, but consider them free w the wheels.
heres the specs:
20x9.5 +7 concave
20x12 +39 concave
tires are yokohama s Drives 255 30 20
and PIRELLI PZERO NERO 325 25 20..
they are an older tire but were extremely expensive. Again, consider them as free.
If you are willing to pay a reasonable price, i have a SPARE 325 ( as in extra 3rd)tire for you as well.
These include new and never before installed CF version billet center caps as well as my TPMS sensors in the rears (Not sure on battery life remaining but should be fine), and i will include the fronts as well, however they arent installed. Another fubar from the shop.
one wheel has some small scratches on one of the spoke faces, this is not into the metal or anything from curbing, its just because the shop that was working on my car doesnt care about my stuff apparently.
Forgestar says these should fit a 350z w negative camber in the front and a fender roll and pullin the rear.
A friends says he fit 20x10.5 +15 w negative camber up front.
[B] the math and fitment is on 100% you, just like any other time youre ordering wheels....i have accurately represented the wheel specs, the rest is up to you..
1400 bucks obo. Youd have to paypal this or do cash if your local.. so if youre offering less we need to speak on that.
shipping is available and can be discussed as well.
I have a local offer at 1200 cash....but man, im really throwing away brand new wheels here.
These are a few grand retail, and modbargains is the cheapest place selling these online now.. and for a standard set new they are 1800 dollars, with additonal change for 12 in wide and additional charge for Bronse color. Shipping is not included by them at that price. total cost for a set of these new and at a higly discounted price is 2050 plus shipping, most likely 165.. so total at the cheapest place you will find is still about 2200 bucks.. w out any tires.
heres the pics i have to show tire and wheel condition.
u can see the innners have no dirt of dust, = not used.
rear tires to show little wear.
They have not been driven on, and are "new", but hve been alive and on the car during a 2 year build.. indoor only. They are not curbed, they are pristinely clean inside the wheel barrel, and may have some light swirls here n there from never having been polished or realy cleaned or anything yet, i sprayed em down w glass cleeaner for the pics.. but we all know thats not ideal.. they will only look better w normal care.
Last edited by bmccann101; 05-28-2013 at 08:40 AM. Reason: scratch was surface only and was buffed out.
05-28-2013, 08:41 AM
#5
350Z-holic
Thread Starter
iTrader: (16)
Join Date: Aug 2006
Location: Scottsdale/coyote drophouse
Posts: 8,213
Received 399 Likes
on
227 Posts
Howdy,
I posted in regional but now have my username photo up, so im moving it to national forum.
Im not in dire need to sell, but I would like to buy an air bags set up for my vip car daily driver..
I have a set of mounted yet NEVER DRIVEN ON Forgestar F14s in bronze burst powder coat.
The tires Id say have 85-90% tread on them and no irregular wearing. They are surely a few eyars old, but consider them free w the wheels.
heres the specs:
20x9.5 +7 concave
20x12 +39 concave
tires are yokohama s Drives 255 30 20
and PIRELLI PZERO NERO 325 25 20..
they are an older tire but were extremely expensive. Again, consider them as free.
If you are willing to pay a reasonable price, i have a SPARE 325 ( as in extra 3rd)tire for you as well.
These include new and never before installed CF version billet center caps as well as my TPMS sensors in the rears (Not sure on battery life remaining but should be fine), and i will include the fronts as well, however they arent installed. Another fubar from the shop.
one wheel has some small scratches on one of the spoke faces, this is not into the metal or anything from curbing, its just because the shop that was working on my car doesnt care about my stuff apparently.
Forgestar says these should fit a 350z w negative camber in the front and a fender roll and pullin the rear.
A friends says he fit 20x10.5 +15 w negative camber up front.
[B] the math and fitment is on 100% you, just like any other time youre ordering wheels....i have accurately represented the wheel specs, the rest is up to you..
1400 bucks obo. Youd have to paypal this or do cash if your local.. so if youre offering less we need to speak on that.
shipping is available and can be discussed as well.
I have a local offer at 1200 cash....but man, im really throwing away brand new wheels here.
These are a few grand retail, and modbargains is the cheapest place selling these online now.. and for a standard set new they are 1800 dollars, with additonal change for 12 in wide and additional charge for Bronse color. Shipping is not included by them at that price. total cost for a set of these new and at a higly discounted price is 2050 plus shipping, most likely 165.. so total at the cheapest place you will find is still about 2200 bucks.. w out any tires.
heres the pics i have to show tire and wheel condition.
u can see the innners have no dirt of dust, = not used.
rear tires to show little wear.
They have not been driven on, and are "new", but hve been alive and on the car during a 2 year build.. indoor only. They are not curbed, they are pristinely clean inside the wheel barrel, and may have some light swirls here n there from never having been polished or realy cleaned or anything yet, i sprayed em down w glass cleeaner for the pics.. but we all know thats not ideal.. they will only look better w normal care.
I posted in regional but now have my username photo up, so im moving it to national forum.
Im not in dire need to sell, but I would like to buy an air bags set up for my vip car daily driver..
I have a set of mounted yet NEVER DRIVEN ON Forgestar F14s in bronze burst powder coat.
The tires Id say have 85-90% tread on them and no irregular wearing. They are surely a few eyars old, but consider them free w the wheels.
heres the specs:
20x9.5 +7 concave
20x12 +39 concave
tires are yokohama s Drives 255 30 20
and PIRELLI PZERO NERO 325 25 20..
they are an older tire but were extremely expensive. Again, consider them as free.
If you are willing to pay a reasonable price, i have a SPARE 325 ( as in extra 3rd)tire for you as well.
These include new and never before installed CF version billet center caps as well as my TPMS sensors in the rears (Not sure on battery life remaining but should be fine), and i will include the fronts as well, however they arent installed. Another fubar from the shop.
one wheel has some small scratches on one of the spoke faces, this is not into the metal or anything from curbing, its just because the shop that was working on my car doesnt care about my stuff apparently.
Forgestar says these should fit a 350z w negative camber in the front and a fender roll and pullin the rear.
A friends says he fit 20x10.5 +15 w negative camber up front.
[B] the math and fitment is on 100% you, just like any other time youre ordering wheels....i have accurately represented the wheel specs, the rest is up to you..
1400 bucks obo. Youd have to paypal this or do cash if your local.. so if youre offering less we need to speak on that.
shipping is available and can be discussed as well.
I have a local offer at 1200 cash....but man, im really throwing away brand new wheels here.
These are a few grand retail, and modbargains is the cheapest place selling these online now.. and for a standard set new they are 1800 dollars, with additonal change for 12 in wide and additional charge for Bronse color. Shipping is not included by them at that price. total cost for a set of these new and at a higly discounted price is 2050 plus shipping, most likely 165.. so total at the cheapest place you will find is still about 2200 bucks.. w out any tires.
heres the pics i have to show tire and wheel condition.
u can see the innners have no dirt of dust, = not used.
rear tires to show little wear.
They have not been driven on, and are "new", but hve been alive and on the car during a 2 year build.. indoor only. They are not curbed, they are pristinely clean inside the wheel barrel, and may have some light swirls here n there from never having been polished or realy cleaned or anything yet, i sprayed em down w glass cleeaner for the pics.. but we all know thats not ideal.. they will only look better w normal care.
05-28-2013, 08:51 AM
#7
350Z-holic
Thread Starter
iTrader: (16)
Join Date: Aug 2006
Location: Scottsdale/coyote drophouse
Posts: 8,213
Received 399 Likes
on
227 Posts
dude.. selling these has been a NIGHTMARE lol.. even locally.
" will you trade for XXrs? "
" Ill have to lowball you, and its going to be less than 1000"
" Why wont you let me fit them on my car first?"
... craigslist calls at 4am..
99% of the ppl have no idea how to determine fitment, or what these are as compared to a cast POS..
Yes.. you are 100% correct man. Ppl just dont seem to know.. and 1400 bucks for a set of wheels aint like a big chunk of change lol.. if ppl cant afford a grand here n there.. best not be modding thier Z at all and be looking for a better career lol.
" will you trade for XXrs? "
" Ill have to lowball you, and its going to be less than 1000"
" Why wont you let me fit them on my car first?"
... craigslist calls at 4am.. 99% of the ppl have no idea how to determine fitment, or what these are as compared to a cast POS..
Yes.. you are 100% correct man. Ppl just dont seem to know.. and 1400 bucks for a set of wheels aint like a big chunk of change lol.. if ppl cant afford a grand here n there.. best not be modding thier Z at all and be looking for a better career lol.
