Hello! I have a 2003 Nissan 350z Touring Hatch, and I just bought a set of KLÄSSEN iD wheels that the previous owner had on his BMW M2, and I cannot seem to find a set of adapters that match my…

Hey guys. Really need your input.

So I have a 2004 350Z Roadster (6 speed) _2nd owner _

Car has 71k original miles on it.

Engine and Transmission are healthy.

Hello! So I bought a set of wheel spacers to adapt the 5×114 to 5×120 for a set of wheels that I just bought, and once I got the spacers I tried to test fit them, and they fit fine, but the hub for…

current issues. while driving down the highway heard a noise comparable to a snapping and experienced a loss of power. while going to a safe place to park my RPMS fluctuated to a point higher than…

What is the normal manifold vacuum pull on the VQ35HR engine?

I am going to cap off the vac port and install an electric vacuum pump and I want it to be lower vacuum than stock for a stiffer pedal…

I installed new axles and wheel bearings and ever since then the z bounces a lot in the rear and shakes a lot. It did throw a slip warning once while driving straight. I am a bit confused because I…

Son bought a 2003 350z. The dash is lit as stated above and the brakes are soft. If you push them once then let off and hit them a second time they are better to stop. I’ve been researching a bit and…