How to center mount the front license plate with minimal drilling?
#1
Registered User
Thread Starter
Join Date: Feb 2014
Location: SFBay
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
How to center mount the front license plate with minimal drilling?
A lot of people use the tow hook to mount the front license plate. But I want to put the license plate at the center.
Reading the owner's manual, I would need to drill 2 holes (already marked and indented onto the bumper from the factory), and 2 other holes through the plate holder into the bumper.
Did I interpret the manual wrong? Any other less intrusive options?
thanks.
Reading the owner's manual, I would need to drill 2 holes (already marked and indented onto the bumper from the factory), and 2 other holes through the plate holder into the bumper.
Did I interpret the manual wrong? Any other less intrusive options?
thanks.
#3
New Member
Use nails. No drilling necessary.
#5
New Member
#6
Master
iTrader: (8)
http://www.stillen.com/products/lic-...djckr3u9ktcgt7
Trending Topics
#8
New Member
...wut? I thought they were all centered? Post a pic.
#17
Registered User
Join Date: Feb 2012
Location: Pasadena, CA
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
i got the tow hook plate mount as well, but drilled the top of that plate so the whole thing would mount lower. i have the V2 front and everything fits nice and neat within the grill
#18
Registered User
Thread Starter
Join Date: Feb 2014
Location: SFBay
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Sorry, I forgot to mention it is a 370z. The tow hook is on the passenger side.
I am skeptical about mounting it on the tow hook and bring the license plate to the center with a longish bracket as the whole thing might vibrate like crazy.
I am skeptical about mounting it on the tow hook and bring the license plate to the center with a longish bracket as the whole thing might vibrate like crazy.
#19
New Member