FS: Wheel Spacers - 10mm slip-on and 15mm adaptor type
03-26-2017, 04:55 PM
#1
Wheel Spacers - 10mm slip-on and 15mm adaptor type
Up for sale are two sets of wheel spacers that I was using on my 350z before I sold it. Both sets are 5x114.3 hole pattern and hub-centric.
The 10mm thick set is made by Eibach and are slip-on type spacers, while the 15mm thick set is made by B2 Designs (a vendor on my350z forums years ago) and are bolt-on adaptor type spacers.
EDIT: 15mm spacers sold!
Note: for the 10mm slip-on spacers, you will need to use extended wheel studs to get adequate thread engagement with your lug nuts.
I am asking $50 plus shipping for the 10mm spacers, and $70 plus shipping for the 15mm spacers. Local pickup is also welcomed (19355).
Thanks for looking!
For reference, this is how my car looked with the 10mm front and 15mm rear spacers on a set of 19x9.5 et22 front and 19x10.5 et22 rear wheels:
The 10mm thick set is made by Eibach and are slip-on type spacers, while the 15mm thick set is made by B2 Designs (a vendor on my350z forums years ago) and are bolt-on adaptor type spacers.
EDIT: 15mm spacers sold!
Note: for the 10mm slip-on spacers, you will need to use extended wheel studs to get adequate thread engagement with your lug nuts.
I am asking $50 plus shipping for the 10mm spacers, and $70 plus shipping for the 15mm spacers. Local pickup is also welcomed (19355).
Thanks for looking!
For reference, this is how my car looked with the 10mm front and 15mm rear spacers on a set of 19x9.5 et22 front and 19x10.5 et22 rear wheels:
Last edited by sry110; 07-17-2017 at 07:48 AM.
