Rebuilding Stock Brembos
#1
Registered User
Thread Starter
iTrader: (28)
Join Date: Feb 2005
Location: atlanta
Posts: 1,260
Likes: 0
Received 0 Likes
on
0 Posts
Rebuilding Stock Brembos
I found this thread while searching on how to rebuild and refresh the Brembo brakes.
I followed this step by step procedure and it was dead on and thought Id share it with you guys.
http://www.galanttuners.com/viewtopic.php?f=14&t=157
I followed this step by step procedure and it was dead on and thought Id share it with you guys.
http://www.galanttuners.com/viewtopic.php?f=14&t=157
#6
Registered User
iTrader: (3)
Join Date: Dec 2003
Location: Chicago
Posts: 529
Likes: 0
Received 0 Likes
on
0 Posts
This should be the rear set:
http://www.courtesyparts.com/44000l-...=714_880_4406&
Last edited by derek173; 09-29-2009 at 11:00 AM.
#7
Registered User
iTrader: (3)
Join Date: Dec 2003
Location: Chicago
Posts: 529
Likes: 0
Received 0 Likes
on
0 Posts
I'm confused? It says for the front you need two kits, one for each caliper I assume.
"In the Nissan universe, this part is known as SEAL KIT-DISC BRAKE.
The 350Z (Z33) uses a quantity of 2 of this part in this location."
On the rear it only mentions you need 1 kit
In the Nissan universe, this part is known as SEAL KIT-DISC BRAKE.
The 350Z (Z33) uses a quantity of 1 of this part in this location.
I think that is wrong no? You will probably need 4 total one for each caliper. Can anyone confirm?
"In the Nissan universe, this part is known as SEAL KIT-DISC BRAKE.
The 350Z (Z33) uses a quantity of 2 of this part in this location."
On the rear it only mentions you need 1 kit
In the Nissan universe, this part is known as SEAL KIT-DISC BRAKE.
The 350Z (Z33) uses a quantity of 1 of this part in this location.
I think that is wrong no? You will probably need 4 total one for each caliper. Can anyone confirm?
Trending Topics
#8
Registered User
Thread Starter
iTrader: (28)
Join Date: Feb 2005
Location: atlanta
Posts: 1,260
Likes: 0
Received 0 Likes
on
0 Posts
I'm confused? It says for the front you need two kits, one for each caliper I assume.
"In the Nissan universe, this part is known as SEAL KIT-DISC BRAKE.
The 350Z (Z33) uses a quantity of 2 of this part in this location."
On the rear it only mentions you need 1 kit
In the Nissan universe, this part is known as SEAL KIT-DISC BRAKE.
The 350Z (Z33) uses a quantity of 1 of this part in this location.
I think that is wrong no? You will probably need 4 total one for each caliper. Can anyone confirm?
"In the Nissan universe, this part is known as SEAL KIT-DISC BRAKE.
The 350Z (Z33) uses a quantity of 2 of this part in this location."
On the rear it only mentions you need 1 kit
In the Nissan universe, this part is known as SEAL KIT-DISC BRAKE.
The 350Z (Z33) uses a quantity of 1 of this part in this location.
I think that is wrong no? You will probably need 4 total one for each caliper. Can anyone confirm?
I'll keep ya posted
#12
New Member
iTrader: (4)
I found this thread while searching on how to rebuild and refresh the Brembo brakes.
I followed this step by step procedure and it was dead on and thought Id share it with you guys.
http://www.galanttuners.com/viewtopic.php?f=14&t=157
I followed this step by step procedure and it was dead on and thought Id share it with you guys.
http://www.galanttuners.com/viewtopic.php?f=14&t=157
#20
Registered User
iTrader: (3)
Join Date: Apr 2005
Location: .
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
They probably upgraded the forum software and the original link is broken.
I found that same thread here:
http://www.galanttuners.com/index.php/topic,157.0.html