Part numbers for OEM Brembo seal kit
#1
Part numbers for OEM Brembo seal kit
41120-12U25 is the part number for the front seal kit list for $29.68
44120-12U25 is the part number for the rear seal kit list for $57.46
These are complete! Includes seals, dust boots, and bleed screw rubber. One kit for the front calipers one kit for the rear calipers!
44120-12U25 is the part number for the rear seal kit list for $57.46
These are complete! Includes seals, dust boots, and bleed screw rubber. One kit for the front calipers one kit for the rear calipers!
#5
350Z-holic
iTrader: (26)
It looked like you were answering a question, but unfortunately your was the first post so to me, it didn't make much sense to have an answer when there was no question.
BTW - it's great info. I'll probably need it this summer cause I figure my Brembos are about due for a rebuild.
BTW - it's great info. I'll probably need it this summer cause I figure my Brembos are about due for a rebuild.
#6
Some other info: there is an o-ring between the calipers that I haven't sourced so be careful if you take the two halves apart. Those don't come in the kits. I just reused mine but someone that really puts the heat to them may need to replace. The torque spec is 90ft/lbs for the caliper halves.
Just giving you a hard time
Just giving you a hard time
Thread
Thread Starter
Forum
Replies
Last Post
StateNuke08
Brakes & Suspension (DIY)
13
10-31-2015 05:01 AM
VQA33
Wheels Tires
8
09-08-2015 08:30 PM
BlinkerFluid
Engine
0
09-08-2015 10:06 AM