'03-05 Guys, you NEED 06+ Brakes. Now.
#1
'03-05 Guys, you NEED 06+ Brakes. Now.
I hated the look of my horrible '03 single piston calipers and tiny rotors, specially with my brothers S2000's OE brakes looking much bigger. The car shouldve came with these from day 1.
As for actual braking performance, im sure its increased but I dont track the car but I wouldnt know. One thing I did notice right away was that they "bite" faster than before.
PARTS:
-07 calipers
-Stop Tech SS lines
-eBay slotted rotors
-Centric ceramic pads
-Dot 3 fluid
-Silver caliper paint
All in all, I spent about $400 for the upgrade on all 4 corners.
Enough talk, onto pics.
REAR:
As for actual braking performance, im sure its increased but I dont track the car but I wouldnt know. One thing I did notice right away was that they "bite" faster than before.
PARTS:
-07 calipers
-Stop Tech SS lines
-eBay slotted rotors
-Centric ceramic pads
-Dot 3 fluid
-Silver caliper paint
All in all, I spent about $400 for the upgrade on all 4 corners.
Enough talk, onto pics.
REAR:
Last edited by DarkCreep; 12-09-2014 at 12:11 AM.
#3
New Member
The HR brakes are awesome. I will be selling my front setup soon as I have the Akebono kit to install. Nice post OP.
Trending Topics
#10
Registered User
iTrader: (1)
That rear rotor looks way too big for that caliper.
Is it all just bolt on stuff? I've always thought the 03-05 brakes looked awful tiny. Especially with my new wheels. But I just put all new brakes (rotors and pads) all the way around not too long ago. So I wont be replacing them again for quite some time.
Is it all just bolt on stuff? I've always thought the 03-05 brakes looked awful tiny. Especially with my new wheels. But I just put all new brakes (rotors and pads) all the way around not too long ago. So I wont be replacing them again for quite some time.
#15
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
Front has bigger rotors and calipers, the rear is just a bigger rotor
#17
New Member
iTrader: (11)
The rear calipers are technically not the same as the brackets are bigger, you need a full set of calipers and rotors for the swap. The way they look is normal, kinda weird but the slotted rotors really look out of place, there was more metal added to the rear but no bigger calipers so it looks out of place.
#19
Registered User
iTrader: (1)
See how close the caliper bracket is to the hub on the 04 front and then how far away it is on the 06+?
They have the curve in the bracket so it can get the pads deeper onto the rotor without hitting the center hat.