JWT Flywheels Now Available >>
#1
Sponsor
Concept Z Performance
Concept Z Performance
Thread Starter
iTrader: (24)
Join Date: Sep 2002
Location: Arizona
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
JWT Flywheels Now Available >>
New and affordable flywheels are available from JWT What's Nice about these Flywheels is that the 300ZX Twin Turbo Clutches will fit on them (1150KG, compared to 850KG Stock 350Z Stock clutch), for all those big ballers out there $414.99 Shipped
Buy Online
Buy Online
#7
Registered User
iTrader: (1)
Join Date: May 2002
Location: Phoenix AZ
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
How difficult is this to do yourself? Do you need special tools? I have access to a lift and tools, and wondering if it only takes a few hours. Maybe somebody can post a 'How to'. Thanks.
Trending Topics
#8
SFZCC
iTrader: (19)
Join Date: May 2002
Location: Lake Worth, FL
Posts: 7,419
Likes: 0
Received 0 Likes
on
0 Posts
You have to remove the transmission to access the clutch and flywheel.
To remove transmission:
1. Remove Strut bar
2. Remove cross bar (requires removel of steering/engine mount insultaor/support engine)
3. Remove cat
4. Remove propeller shaft
5. Remove control lever and separate shifter lever
6. Remove clutch cylinder
7. Remove POS sensor
8. Remove starter motor
9. Remove rear member
10. Remove engine and transmission mounting bolts
11. Remove transmission
There are a few more steps removing some sensors but this is the bulk of it, it seems like it would not be hard if you have a lift and the tools, power tools and jack stands to support engine and transmission.
To remove transmission:
1. Remove Strut bar
2. Remove cross bar (requires removel of steering/engine mount insultaor/support engine)
3. Remove cat
4. Remove propeller shaft
5. Remove control lever and separate shifter lever
6. Remove clutch cylinder
7. Remove POS sensor
8. Remove starter motor
9. Remove rear member
10. Remove engine and transmission mounting bolts
11. Remove transmission
There are a few more steps removing some sensors but this is the bulk of it, it seems like it would not be hard if you have a lift and the tools, power tools and jack stands to support engine and transmission.
#10
Registered User
Thats it i want one. But i will wait until i wear out my clutch. I cant convince myself to replace my clutch and flywheel while the ones i have still works. But man those are some great prices you WILL be hearing from me for a flywheel and a 300zx clutch in about 6months.
#12
Registered User
Yes i know that but if i do replace the flywheel it will be better to put a new clutch on it at the same time. Its a pain in the a$$ to removed the tranny and id rather not have to do it now, and then again in a year or two to put a new clutch on. It costs a lot of $$$ to get one of these installed in labor alone.
#13
Charter Member #50
iTrader: (3)
Join Date: May 2002
Location: Houston, Texas
Posts: 3,552
Likes: 0
Received 0 Likes
on
0 Posts
does changing the lighten flywheel have the same effect as changing to a lighter crank pulley? The purpose is to reduce the rotational mass so the engine can rev better?
#14
SFZCC
iTrader: (19)
Join Date: May 2002
Location: Lake Worth, FL
Posts: 7,419
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Apexi350z
does changing the lighten flywheel have the same effect as changing to a lighter crank pulley? The purpose is to reduce the rotational mass so the engine can rev better?
does changing the lighten flywheel have the same effect as changing to a lighter crank pulley? The purpose is to reduce the rotational mass so the engine can rev better?
#15
Sponsor
Concept Z Performance
Concept Z Performance
Thread Starter
iTrader: (24)
Join Date: Sep 2002
Location: Arizona
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Apexi350z
does changing the lighten flywheel have the same effect as changing to a lighter crank pulley? The purpose is to reduce the rotational mass so the engine can rev better?
does changing the lighten flywheel have the same effect as changing to a lighter crank pulley? The purpose is to reduce the rotational mass so the engine can rev better?
#16
Registered User
Join Date: Jan 2003
Location: Philadelphia
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Apexi350z
does changing the lighten flywheel have the same effect as changing to a lighter crank pulley? The purpose is to reduce the rotational mass so the engine can rev better?
does changing the lighten flywheel have the same effect as changing to a lighter crank pulley? The purpose is to reduce the rotational mass so the engine can rev better?
#17
350Z-holic
iTrader: (43)
flywheels allow the car to rev up faster.. on the track its awesome especially if you have a Supercharger or turbo you get to boost sooner, but when driving around town, you typically have a slightly higher engagement point/play with the clutch more cuz the revs tend to drop alot faster, you have to move your feet alot quicker...
for NA purposes.. i didnt think my aftermarket flywheel was worth the money... but for boost, i think you would like it more...
clutch if anything would probably be the better upgrade so that you can dump the clutch and not fear it slipping....
for NA purposes.. i didnt think my aftermarket flywheel was worth the money... but for boost, i think you would like it more...
clutch if anything would probably be the better upgrade so that you can dump the clutch and not fear it slipping....
#18
How quick revs drops is also controlled by the ECU, not just the mass of the parts. In this case, the ECU is going to probably keep them from dropping quicker than they already do.
On a Turbo, boost comes from engine load, not so much RPMs. It's why many folks never see full boost in 1st gear, engine never sees enough load. A light flywheel if anything, is going to reduce engine load, and make boost come on later rather than sooner with a turbo.
At least this is the knowledge I have been given... I see so many differing oppinions on things I usually dont even bother to reply, but Im bored.
Mark
On a Turbo, boost comes from engine load, not so much RPMs. It's why many folks never see full boost in 1st gear, engine never sees enough load. A light flywheel if anything, is going to reduce engine load, and make boost come on later rather than sooner with a turbo.
At least this is the knowledge I have been given... I see so many differing oppinions on things I usually dont even bother to reply, but Im bored.
Mark
#19
Registered User
Join Date: Jan 2003
Location: Philadelphia
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by msink
On a Turbo, boost comes from engine load, not so much RPMs. It's why many folks never see full boost in 1st gear, engine never sees enough load. A light flywheel if anything, is going to reduce engine load, and make boost come on later rather than sooner with a turbo.
On a Turbo, boost comes from engine load, not so much RPMs. It's why many folks never see full boost in 1st gear, engine never sees enough load. A light flywheel if anything, is going to reduce engine load, and make boost come on later rather than sooner with a turbo.