Revup Block conversion?
#1
Registered User
Thread Starter
iTrader: (3)
Join Date: Dec 2009
Location: West Hartford, CT
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
Revup Block conversion?
I have a revup vq here that i need to use on a nonerevup harness and ecu. I got the motor for cheap and i have extra heads and chains, and timing covers here to convert it over.
I know to convert it so it works with Non revup harness, you have to swap heads/gears, and timing chain cover. Thats not a problem. I have those here. Is anything else that needs to be done.
Also when swapping heads, are the oil and coolant passages aligned and in correct positions.
I know this has been covered before but i just cant seem to find these damn threads. I fail badly at searching. I appologize for that. And i appreciate any help i can get here. Thanks alot.
I know to convert it so it works with Non revup harness, you have to swap heads/gears, and timing chain cover. Thats not a problem. I have those here. Is anything else that needs to be done.
Also when swapping heads, are the oil and coolant passages aligned and in correct positions.
I know this has been covered before but i just cant seem to find these damn threads. I fail badly at searching. I appologize for that. And i appreciate any help i can get here. Thanks alot.
Thread
Thread Starter
Forum
Replies
Last Post