FS: Built VQ35de TURBO longblock
02-23-2012, 12:05 AM
#1
Registered User
Thread Starter
iTrader: (7)
Join Date: Apr 2007
Location: So cal
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
Built VQ35de TURBO longblock SOLD!
Im selling my newly rebuilt VQ
0 miles never installed after the rebuild
SOLD TO DJ LIZARD!
Located in Fountain Valley CA
Built By Sly from SA performance Building motors for Nissan motorsports for 15 years
Motor is like BRAND FREEKING NEW!!
I also did this !!
http://www.jimwolftechnology.com/wol...HEAD_BOLTS.pdf
Has the HR headgaskets block notch and the HR head studs (2 dots)
pics:
0 miles never installed after the rebuild
SOLD TO DJ LIZARD!
Located in Fountain Valley CA
- New CP pistons
- Carillo Rods
- all new ACL RACE bearings
- All new Timing chains tensioners guides idlers waterpump oil pump EVERYTHING
- 1mm oversize Supertech valves (and springs)
- 3angle valvejob
- New valve guides/seals
- Scott's Performance Cams Stage 2 255/255 213/213 .410"/.410"
Built By Sly from SA performance Building motors for Nissan motorsports for 15 years
Motor is like BRAND FREEKING NEW!!
I also did this !!
http://www.jimwolftechnology.com/wol...HEAD_BOLTS.pdf
Has the HR headgaskets block notch and the HR head studs (2 dots)
pics:
Last edited by unchi; 03-02-2012 at 05:21 PM.
Trending Topics
02-26-2012, 07:34 PM
#8
Registered User
Thread Starter
iTrader: (7)
Join Date: Apr 2007
Location: So cal
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
7 Liter Motor going in
Thanks
Bore is .5 over and OEM gaskets and the HR head studs as per Jim wolf's methods
UPDATE i checked the build sheet it has ACL race bearings sorry for the mixup
Thanks
UPDATE i checked the build sheet it has ACL race bearings sorry for the mixup
02-29-2012, 06:04 PM
#10
Registered User
Thread Starter
iTrader: (7)
Join Date: Apr 2007
Location: So cal
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
BTW the Guy who built my motor also built the GTR i just tuned for the local 1/2 mile airstrip event we just had out here
The GTR got 3rd overall behind a Switzer E900 GTR running 28+ psi and a 1000hp 997tt !!
The Gtr made 787 on 91 @21 psi and when i tuned on (C16 @ 24 psi) i never got a good pull (the tires were spinning on the dyno in 2wd)
Ill have it back on the dyno this week i hope on C16 @28psi AWD
i wanna see 900 whp
The GTR got 3rd overall behind a Switzer E900 GTR running 28+ psi and a 1000hp 997tt !!
The Gtr made 787 on 91 @21 psi and when i tuned on (C16 @ 24 psi) i never got a good pull (the tires were spinning on the dyno in 2wd)
Ill have it back on the dyno this week i hope on C16 @28psi AWD
i wanna see 900 whp
03-02-2012, 01:50 PM
#11
BTW the Guy who built my motor also built the GTR i just tuned for the local 1/2 mile airstrip event we just had out here
The GTR got 3rd overall behind a Switzer E900 GTR running 28+ psi and a 1000hp 997tt !!
The Gtr made 787 on 91 @21 psi and when i tuned on (C16 @ 24 psi) i never got a good pull (the tires were spinning on the dyno in 2wd)
Ill have it back on the dyno this week i hope on C16 @28psi AWD
i wanna see 900 whp
The GTR got 3rd overall behind a Switzer E900 GTR running 28+ psi and a 1000hp 997tt !!
The Gtr made 787 on 91 @21 psi and when i tuned on (C16 @ 24 psi) i never got a good pull (the tires were spinning on the dyno in 2wd)
Ill have it back on the dyno this week i hope on C16 @28psi AWD
i wanna see 900 whp
BUMP great price, pretty much what I spent on my SHORT block.
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM
