When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I've searched for about a half hr now and can't find the hks race bypass valve. I have a vortech v2 with the vortech bypass valve. I can't stand the vortech one and have heard good things about the hks one. I can't find the Fricken thing! Can anyone send me a link to where you got yours or something it's driving me crazy lol I feel like an idiot that I can't find something on the Internet! Thanks everyone!
That doesn't appear to mount the same way my vortech bypass does, does it mount in same place? Does the tial close quicker than the vortech to get to boost quicker? Anyway you can send me photo of your setup meanZ?
The tial will come with a flange that needs to be welded in. The inlet and out let is literally twice the size. I'll take a pic in a minute where mine is located. Lucky my bumper is still off.
You don't "have" to weld, you can purchase the screw on piece for hks bov, and then use hks connection for tial. Thats what I did. Except, I took advice from my 1300whp corvette roommate, and am running the vortech in the stock location and then running a tial on the up pipe to the throttle body, with a 10lb spring. If you want pics, I could post.
You don't "have" to weld, you can purchase the screw on piece for hks bov, and then use hks connection for tial. Thats what I did. Except, I took advice from my 1300whp corvette roommate, and am running the vortech in the stock location and then running a tial on the up pipe to the throttle body, with a 10lb spring. If you want pics, I could post.
Man I must be dumb even with b the pictures I still don't understand where it is located, is it located where the stock vortech one is? Can you take pic from further away? Can you get me a parts list together and some instructions or something I'm just really not understanding.
Smaller pulley like 2.87 or 2.75 if you want more boost and a little sooner. Bigger crank pulley also like fluid dampr. Changing by pass valve out won't do it.
Sorry for the tardy photos and dirty engine bay. Let me know if you have any questions. But as you can see, the vortech is mounted in stock location and TiAl is installed on the other side of the intercooler.
03-30-2015, 08:42 AM
changing bypass valve and can't find replacement
