actordan

How do you post them to the avatar? Or post them on here?

http://www.imagestation.com/album/in...?id=2128951359

I DON'T LIKE

Armitage

iTrader: (15)

Like this:

actordan

OK, so how would I do it then?

GTNPU Z

iTrader: (17)

Use this command:

[IMG] Place URL of Picture Here [/IMG]

Note: Careful not to use this with HUGE pictures that would take up too much space.

Armitage

iTrader: (15)

Just quote my response and you'll see how to do it.

BigMoeTaki42

https://my350z.com/forum/wheels-and-tires/95126-how-to-post-pictures-hosting.html

Read and enjoy. Nice Z by the way .

Naveen

I like the black hood!

Jun

iTrader: (45)

Here you go:

350Zum

That's purdy!

Destiny350Z

oooooohhhh its beautiful... what are those snazzy looking rims?

hndumafia

iTrader: (10)

destiny - those are volks fine forged sf-winnings

GQ 350z

iTrader: (13)

HOT. Can't wait to get mine.

EDIT:
Looks like you could use a mild spacer in rear.

ravi

chattermark

Can you see out of the rear window? The rear window is small enough as it is..... Besides that, love the car. <M>

mpol99

That uncovered speaker looks ghetto from the inside..... Other than that, the car looks SWEET!

Mantis3024

Very nice car. Only thing I can think of thats missing is clear corners. Is that hood CF? Also, how did you paint the intake manifold?

actordan

I will agree about the sub, I am not to happy with the job they did. I am going to redo it in the near future. The hood is Carbon Fiber from Erebuni. I bought it at www.nopi.com they are still have a HUGE clearance on the C/F hoods for the 350z.

For the paint its pretty easy. Heres the steps:

1. Get your engine primer that is heat resistant(local pep boys)
2. put three light coats primer
3. Let each coat of primer dry completely then wet sand with fine sand paper
(I used the model sand paper from testors, it works great especially in the little crevices)
4. I used 4 light coats of Chevy blue I think
5. in between each coat I wet sand with ultra fine sand paper(once again the testors sand paper works great, bought at micheals for like 3 bux)

The purple color is a lot harder to get as it is a three part paint unlike the plenum

For that I did basically the same as above(USING ENGINE PRIMER this is important, if you use regular primer on the plastic it will bubble from the heat and your car will smell like burnt paint) but the first color is a dark blue, then the top coat is a candy apple blue.

Then after your done painting I put a few coats of engine clear coat on it to keep it shiny. Then I waxed it!

I would be willing to paint some peoples plastic if they want(pay for the paint/shipping and tip me we can work something out). I want to take out the power steerig, coolant and whatever ugly plastics are under teh hood and do the same process, jsut so it "cleans" up the engine bay good!

funkdamonkman

That sub looks familiar.

I would DEFINATELY clean those wires up.

If you want more pics of how mine is set up, I can send them to ya.

I really like the hood.

actordan

is that a 12"? Mines a 12" and they said that it won;t fit back there like that. Hmmmmm I like that, i am prob just put it in between the sway and the seats facing down. with the wires all cleaned up.

Gman2004

iTrader: (8)

From what I can see, that is a sick looking house in the back round. Is that yours or your parents?

actordan

my parents. Thanks