Hey guys,
I posted this in the electronics section but because I personally don't go there nearly as much as this main section I wanted to post it up here too so I could get some more hits. Any advice or knowledge would be tremendously helpful! Thanks!!

Ok, I've had an Apex'i Rev Speed Meter sitting here in the box for quite a few months now and have never been able to find anything anywhere on how to install it in my 03 performance 350Z. Does anyone have any experience with this or know where I could find info on this. I've looked everywhere and it seems stupid that I paid a couple hundred bucks for it and have never used it. If anyone has done the install can you post pics and tips? Thanks in advance!
Fletch

 

Bump, anybody know anything about this?

 

Did it come with an instruction manual? This is the manual from the website http://www.apexi-usa.com/pdf/product...tation/199.pdf It's the best I can do seeing that I never got one. It was on my Things to Buy list though, so tell me how it goes. It looks like alll you have to do is find your ecu and follow those directions. Good luck, hope this helps.

 

what exactly is this and what does it do?

 

Yeah, I appreciate the link but I've already checked all over their website and it only goes up to the Z32. No directions or pinout diagram for the Z33. So, unfotunately it doesn't help. Thanks though!

 

Here check out this link and it will tell you more.
http://www.apexi-usa.com/product_ele...=199&pageNum=1

Basically, it's a meter that can measure a bunch of stuff including g-forces and 0-60 times/1/4 mile times with pretty good accuracy. It also can shut off you speed limiter, .

 

that's freakin pimp!

 

Yeah, it's pretty cool and I want to put it in but can't figure out how! That's why I need HELP!!! SOMEONE HELP ME!!! Haha, I'm ok now...

 

Dude, you should call apex'i directly and ask if they have instructions and the pin diagram for the Z33.

Here's the contact info from Apex'i website.

A'PEXi U.S.A.
330 W. Taft
Orange, CA 92865

(714) 685-5700 Phone
(714) 685-5701 Fax

Business Hours
Monday - Friday
9:00a.m. - 6:00p.m. PST

 

Yeah, I've thought of that too but someone on here told me last time that they had asked a similar question about another product and Apex'i had told them they couldn't tell them how to do it for liability reasons? I'll just call them though and see if anything can be done cuz this sucks. Thanks for the tip!

 

Bump again....

 

I called them and got voicemail so I left a message... Hopefully they call me back.