help needed
09-21-2005, 07:31 PM
#1
Registered User
Thread Starter
Join Date: Sep 2005
Location: ann arbor
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
help needed
i am a student doing my mechanical engg. i have a project to submit tomm where i have to find out the follwing for my fav. car and the 350Z is my fav. but i am not able to get the following please help me and its urgent i need to submit tomm morn. the things i need to know are
CAM location
method of breathing
type of working cycle
mixture preparation (air fuel ratio)
cumbustion chamber design (head design, piston design,spark location)
method of load control..
please help
V
CAM location
method of breathing
type of working cycle
mixture preparation (air fuel ratio)
cumbustion chamber design (head design, piston design,spark location)
method of load control..
please help
V
09-21-2005, 08:07 PM
#2
Guest
Posts: n/a
go to www.nissannews.com
click nissan then 350z then specs
it has a very detailed spec sheet there
hope that helps
click nissan then 350z then specs
it has a very detailed spec sheet there
hope that helps
Last edited by **; 09-21-2005 at 08:13 PM.
09-21-2005, 08:24 PM
#3
Registered User
iTrader: (2)
Join Date: Aug 2004
Location: Portland OR
Posts: 1,207
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by VARUNGS
i am a student doing my mechanical engg. i have a project to submit tomm where i have to find out the follwing for my fav. car and the 350Z is my fav. but i am not able to get the following please help me and its urgent i need to submit tomm morn. the things i need to know are
CAM location
method of breathing
type of working cycle
mixture preparation (air fuel ratio)
cumbustion chamber design (head design, piston design,spark location)
method of load control..
please help
V
CAM location
method of breathing
type of working cycle
mixture preparation (air fuel ratio)
cumbustion chamber design (head design, piston design,spark location)
method of load control..
please help
V
sounds like a quiz !
cam location: 4 cams overhead on top of the cylinders (engine obviously)
breathing: air suction? hehe
working cycle type: 4 stroke- 1. intake 2.compression 3.power 4. exhaust??
combustion chamber design: a: Heads- v-config. 24 valves, 4 valves per cyl.
piston: unknown mabey compression ratio?
spark location: top of cilynder, at an angle coming from top??
am i right on any of these??? hehe
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 06:19 AM
