350z Totaled me.
#1
Registered User
Thread Starter
iTrader: (4)
Join Date: Sep 2005
Location: East Coast
Posts: 1,268
Likes: 0
Received 0 Likes
on
0 Posts
350z Totaled me.
So, I was tweaking my car PC install, namely I was moving my GPS reciever into the trunk area. I put my finder down the hole behind the glovebox, in the trunk. It is a 3/4 inch hole, and my finger got stuck. With no one around. It started to swell and was not comming out. I called the Fire department and they came out. It was pretty crazy but eventually they were able to drill small holes near my finger then rip some of the metal out with pliers, no real damage that is visible on the Z but my finger was pretty f*cked up, too bad my gf did not snap any pictures it was a funny scene.
#6
350Z-holic
iTrader: (113)
Originally Posted by pushing4wardbac
So, I was tweaking my car PC install, namely I was moving my GPS reciever into the trunk area. I put my finder down the hole behind the glovebox, in the trunk. It is a 3/4 inch hole, and my finger got stuck. With no one around. It started to swell and was not comming out. I called the Fire department and they came out. It was pretty crazy but eventually they were able to drill small holes near my finger then rip some of the metal out with pliers, no real damage that is visible on the Z but my finger was pretty f*cked up, too bad my gf did not snap any pictures it was a funny scene.
In fact you should go to Thread tools and delete this thread.
Trending Topics
#10
New Member
iTrader: (17)
Originally Posted by USN HM 350Z
LOL
now tell me where you got that sticker for your mirror
now tell me where you got that sticker for your mirror
I got another one for my other mirror, that one I got from Mach One (sp) motorsports. This one is one line, don't know if it fits on stock mirror.
Here's a picture:
#11
Registered User
Thread Starter
iTrader: (4)
Join Date: Sep 2005
Location: East Coast
Posts: 1,268
Likes: 0
Received 0 Likes
on
0 Posts
Yeah was pretty embarassing, The fire dept guys were talking about unbolting the body pieces, luckily one of them was level headed enough to not destory the whole car.
#16
Registered User
iTrader: (1)
How's the CarPC doing? I'm waiting for my Albatron micro-ITX board to arrive early this week. It'll be sweet since I'm dropping in a 2GHz Turion CPU on it (25W with PowerNow!). I also have an X-Fi Xtreme Audio card waiting to be modified with Burr Brown op amps - this is the MOST important part of my project.
#18
350Z-holic
iTrader: (22)
Join Date: Jul 2003
Location: Texas
Posts: 13,983
Likes: 0
Received 0 Likes
on
0 Posts
Reminds me when I first tried to take my oil filter off of my 03 Z. I tried for 2 hours and tore the **** out of the filter.
Wife came in and turned it the correct way, and the ****er came off. I bled as well! I felt like such an idiot!
Wife came in and turned it the correct way, and the ****er came off. I bled as well! I felt like such an idiot!
Last edited by zand02max; 12-03-2006 at 06:20 PM.