This is what I like about Intense Motorsports....
....u enjoying darrens deep voice huh....
07-27-2007 | 01:19 PM
#69
Originally Posted by vo7848
Originally Posted by IIQuickSilverII
BAHHHHH AHHAHAHAHHAA
Originally Posted by STYXX
Too much time on my hands, it's ticking away at my sanity
I've got too much time on my hands, it's hard to believe such a calamity
I've got too much time on my hands and it's ticking away from me
Too much time on my hands, too much time on my hands
Too much time on my hands
I've got too much time on my hands, it's hard to believe such a calamity
I've got too much time on my hands and it's ticking away from me
Too much time on my hands, too much time on my hands
Too much time on my hands
07-27-2007 | 02:11 PM
#70
Intense rocks... i was like a faded..tipsi and i was speaking Spanish ..spanglish and what ever else and they still understood what i was saying... FTW multi-lingual support LMAO
07-30-2007 | 07:05 AM
#74
Thread Starter
Administrator
iTrader: (25)
Joined: Jun 2005
Posts: 58,609
Likes: 2,747
From: Down Under & Dirty
I finally finished customizing the Veilside side skirts to my liking on Saturday. Keep in mind, the Veilside kit fits perfect out the box. I'm just a perfectionist and don't mind going the extra mile to make what's already perfect, even better.
Saturday morning I had to take a trip to Home Depot in search of a better cutting tool. Everything in my arsenal took entirely too long and too much elbow grease to shave down the hard polyurethane.
After spending an hour at Home Depot I found the perfect tool for the job. A high speed Dremmel cutting attachment. This bad boy @ 10K rpm made quick waste of the polyurethane. Here's some before and after pics of the side skirts. You can see the 1/8 lip I had to remove. I also included test fittment pictures, before and after. Notice how flush the skirts fit after the lip was shaved off.
Saturday morning I had to take a trip to Home Depot in search of a better cutting tool. Everything in my arsenal took entirely too long and too much elbow grease to shave down the hard polyurethane.After spending an hour at Home Depot I found the perfect tool for the job. A high speed Dremmel cutting attachment. This bad boy @ 10K rpm made quick waste of the polyurethane. Here's some before and after pics of the side skirts. You can see the 1/8 lip I had to remove. I also included test fittment pictures, before and after. Notice how flush the skirts fit after the lip was shaved off.
Last edited by VO...; 07-30-2007 at 09:02 AM.
07-30-2007 | 08:25 AM
#77
Originally Posted by vo7848
After spending an hour at Home Depot I found the perfect tool for the job. A high speed Dremmel cutting attachment. This bad boy @ 10rpm made quick waste of the polyurethane.
J/J Val.. good job sir. Write-up and dedication equally impressive.
07-30-2007 | 09:03 AM
#78
Thread Starter
Administrator
iTrader: (25)
Joined: Jun 2005
Posts: 58,609
Likes: 2,747
From: Down Under & Dirty
Originally Posted by INTENSEPOWER
Holy nerd alert!!! J/J Val.. good job sir. Write-up and dedication equally impressive.
J/J Val.. good job sir. Write-up and dedication equally impressive.
07-30-2007 | 11:25 AM
#80
Thread Starter
Administrator
iTrader: (25)
Joined: Jun 2005
Posts: 58,609
Likes: 2,747
From: Down Under & Dirty
Originally Posted by dkmaxitus
ok its nearly impossible to get you guys on the phone. ive been trying to call intense motorsport for over a week now. whats up with dat?!