BEST CHEAPEST MODS FOR THE Z
i think you get more power with the lambo doors
Custom Title.
Joined: Mar 2008
Posts: 213
Likes: 0
From: The SF Bayarrhea
No one correct answer here, but personally I'm starting my own project Z with NGK Iridium plugs, a plenum spacer, and a Popcharger intake.
One more thing worth mentioning, NEVER buy on whatever's "cheapest" alone. My advice is save up and get the quality stuff. Worth the wait and extra effort, saves you from future headaches, and the only time you cry is when you first bust out your wallet.
One more thing worth mentioning, NEVER buy on whatever's "cheapest" alone. My advice is save up and get the quality stuff. Worth the wait and extra effort, saves you from future headaches, and the only time you cry is when you first bust out your wallet.
you get what you pay for.
but once you mod you start a chain reaction that needs completion.
if you do AI you need to also do complete exhaust. (which you have)
so get the spacer, a pulley set test pipes and header's.
then get a piggy back and tune it.
along with that i would also do some suspension work.
but once you mod you start a chain reaction that needs completion.
if you do AI you need to also do complete exhaust. (which you have)
so get the spacer, a pulley set test pipes and header's.
then get a piggy back and tune it.
along with that i would also do some suspension work.
Last edited by Dr. Venture; Sep 27, 2008 at 04:45 AM.
Registered User
iTrader: (1)
Joined: May 2008
Posts: 1,174
Likes: 1
From: Toronto, Ontario (Woodbridge)
+1 to this.
Plenum Spacer: http://www.alteredatmosphere.com/mm5...gory_Code=350Z
or
http://motordyneengineering.com/350Z.php
Test Pipes: http://www.alteredatmosphere.com/mm5..._Code=350Z_EXH
Plenum Spacer: http://www.alteredatmosphere.com/mm5...gory_Code=350Z
or
http://motordyneengineering.com/350Z.php
Test Pipes: http://www.alteredatmosphere.com/mm5..._Code=350Z_EXH
Registered User
Joined: Mar 2003
Posts: 321
Likes: 0
From: Earth
The sarcastic know it all comments to this guy's legitimate question on the first page is exactly why I never post on this site; even though I preordered my Z and have been here longer than most of you.
My favorite mod was a JWT Popcharger. It is the most popular short ram air intake for our cars and cost me around $140. This is also the best first mod to install on your car because it is so simple a cave man could do it. Compared to a cold-air intake, the JWT Pop Charger gives you the same power (5-7hp), an easier install (20-30 min your first time with a wrench) and you don't have the driving through a flood risk like you would with the lower location of the cold-air intake. Best thing about this mod, which you only get on the JWT, is the turbo-like whistle (still no blow off valve woosh of course) it gives you from 3K to 5K RPMs. Some on this site have called it the "poor man's turbo."
My favorite mod was a JWT Popcharger. It is the most popular short ram air intake for our cars and cost me around $140. This is also the best first mod to install on your car because it is so simple a cave man could do it. Compared to a cold-air intake, the JWT Pop Charger gives you the same power (5-7hp), an easier install (20-30 min your first time with a wrench) and you don't have the driving through a flood risk like you would with the lower location of the cold-air intake. Best thing about this mod, which you only get on the JWT, is the turbo-like whistle (still no blow off valve woosh of course) it gives you from 3K to 5K RPMs. Some on this site have called it the "poor man's turbo."
The sarcastic know it all comments to this guy's legitimate question on the first page is exactly why I never post on this site; even though I preordered my Z and have been here longer than most of you.
My favorite mod was a JWT Popcharger. It is the most popular short ram air intake for our cars and cost me around $140. This is also the best first mod to install on your car because it is so simple a cave man could do it. Compared to a cold-air intake, the JWT Pop Charger gives you the same power (5-7hp), an easier install (20-30 min your first time with a wrench) and you don't have the driving through a flood risk like you would with the lower location of the cold-air intake. Best thing about this mod, which you only get on the JWT, is the turbo-like whistle (still no blow off valve woosh of course) it gives you from 3K to 5K RPMs. Some on this site have called it the "poor man's turbo."
My favorite mod was a JWT Popcharger. It is the most popular short ram air intake for our cars and cost me around $140. This is also the best first mod to install on your car because it is so simple a cave man could do it. Compared to a cold-air intake, the JWT Pop Charger gives you the same power (5-7hp), an easier install (20-30 min your first time with a wrench) and you don't have the driving through a flood risk like you would with the lower location of the cold-air intake. Best thing about this mod, which you only get on the JWT, is the turbo-like whistle (still no blow off valve woosh of course) it gives you from 3K to 5K RPMs. Some on this site have called it the "poor man's turbo."
best mod for the money ever.
Registered User
Joined: Dec 2005
Posts: 198
Likes: 0
From: Tucson
Wow im surprised the OP didnt get flamed by making this post. Cant tell you how many times this topic has come up before and people have been told to use the search option. Must be a new crowd. 
But seeing as its still alive +1 ont he pop charger, cheap, easy to instal, sounds good.
But seeing as its still alive +1 ont he pop charger, cheap, easy to instal, sounds good.
you get what you pay for.
but once you mod you start a chain reaction that needs completion.
if you do AI you need to also do complete exhaust. (which you have)
so get the spacer, a pulley set test pipes and header's.
then get a piggy back and tune it.
along with that i would also do some suspension work.
but once you mod you start a chain reaction that needs completion.
if you do AI you need to also do complete exhaust. (which you have)
so get the spacer, a pulley set test pipes and header's.
then get a piggy back and tune it.
along with that i would also do some suspension work.
Also, HFC > Test Pipes
