When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just spent 3 hours of my life cleaning plasti dip... Brainstorming my tire options... Dont know why im so excited about these but if someone offered me twice as much as I just paid for them i still wouldn't sell them...
I think I got a good deal.
Word, Mike! Those cleaned up nice!
3 hours though? Dang! I used my pressure washer on an old wheel I "color tested" with P'dip and it loosened it all up inside of a few minutes then the rest came off pretty easy in minutes with a Mr. Clean pad. But yeah, might've been easier since mine were never baked on from wheel/brake heat.
that does look awesome, however I'd like to see more pictures and see if it stands out from the rest of the car. also pictures do not do paint justice. almost all paint looks nice on a picture.
I don't know what business you're in...but I know what you should be doing - at least on the side
Thanks, I left out the part when I looked for my hole saw for 3 hours... I have 2 sets of them, finally found one of them about 10 minutes ago... On the floor under my miter saw covered in saw dust.
On a positive note I found so many things I forgot I even had... And came to the conclusion I probably dont need anymore tool sets.
Thanks, I left out the part when I looked for my hole saw for 3 hours... I have 2 sets of them, finally found one of them about 10 minutes ago... On the floor under my miter saw covered in saw dust.
On a positive note I found so many things I forgot I even had... And came to the conclusion I probably dont need anymore tool sets.
And im in the towing broken-down jalopy business.
AWE, so all you need is a work bench and a cleaner (apprentice) What you don't need is more clamps
Do you use acoustic cement or carpenters glue? You need a air nailer, dboyz - no clamps, no pre-drill, no counter sink, no pocket holes (although they are quite nice)...full steam ahead
I am using titebond 2 wood glue for this one... I'm pretty much just using what I had laying around... I purchased like 1500 kreg pocket screws a few years ago and I have about 1400 left so I use them whenever I can...
While searching for my hole saw I found some other cool screws I used for the top, im pretty sure they are specifically made for Windows but hey they worked out well.
Sealed the inside with titebond... Once I screw it into my spare tire bung im going to throw a piece of flashing tape over it... Pretty sure it will be air sealed nicely and just under 2 sqft
I am using titebond 2 wood glue for this one... I'm pretty much just using what I had laying around... I purchased like 1500 kreg pocket screws a few years ago and I have about 1400 left so I use them whenever I can...
While searching for my hole saw I found some other cool screws I used for the top, im pretty sure they are specifically made for Windows but hey they worked out well.
Sealed the inside with titebond... Once I screw it into my spare tire bung im going to throw a piece of flashing tape over it... Pretty sure it will be air sealed nicely and just under 2 sqft
06-24-2017, 02:40 PM
