3m installation disaster *please help*
#1
3m installation disaster *please help*
I am in desperate need of advice regarding the 3m clear bra kit- I’ve had a terrible experience. After reading all the posts on this topic, the only thing I can deduce is a bad installer, which surprises me because this person is highly detail attentive and has done this on many high-end cars/suvs as well as great work for me in the past. His reason for the problem was a ‘bad kit’. He said the kit is too new and will require more installations/complaints from the installer before they get the pattern right. Supposedly this kit is from X-pel, however after looking at everyone’s pictures of the X-pel kit, I can find many differences (hood area coverage). It looks like this should’ve been stretched more. He had to cut the bumper piece into 11 separate pieces to get coverage. ***disaster*** I know I couldn’t have done any better (and he didn’t charge me anything), but I’m so frustrated because nobody else seems to be having any problems with this stuff. So, a few questions please…. First, is everyone’s mirror pattern applied in two pieces? And, should the bumper piece provide coverage up to the bottom of the headlamp lens? (along that small ridge just below the lens) Also, I would greatly appreciate the name of a reputable installer. I’m in Birmingham, but have friends and family in Atlanta and Nashville. Thanks much for any information. (yes these pictures are painful…. Or just plain funny)
#4
That is just wrong.....
You say he has done work for you before? That install doesn't look like it. That is the sadest insall I have ever seen. I would remove it and find a new installer and get it done the correct way. I don't think it was necesary to cut it into 19 peices. Sorry man.
#6
Sorry man...
That stuff has to come off....
I can't vouch for kit quality here as I have not seen it IRL, but I can say the price is right and looks good in the pics.
link
Those pictures are what the kit *should* look like when properly installed.
Again, sorry this happened to you.
I can't vouch for kit quality here as I have not seen it IRL, but I can say the price is right and looks good in the pics.
link
Those pictures are what the kit *should* look like when properly installed.
Again, sorry this happened to you.
Last edited by POWERZ; 09-13-2002 at 06:28 AM.
Trending Topics
#8
that is so sad. i feel for you. but i would ask him to remove that junk now before it leaves a permanent mark with all those gaps in between the sepaarate pieces. it looks like packaging tape applied to your car.
#11
Guest
Posts: n/a
installer
please call me at my shop 410-549-3551 ill do what i can to help you find a good one through my network, if anyone has read my posts, now you see the justification for prices, Im sorry that you had to go through this. I'll do what i can to help! .....Rob
#12
Guest
Posts: n/a
Hey Hosss, that is a terrible terrible install, cutting every corner at its finest in those pics. The bumper piece from expel is 2 pieces, and meant to be installed that way! If you want, give me a call here at the shop 860-513-1044, I'll cut you a kit and send it out to you for my cost. Sorry you had to have someone waste your time and money like that.
-Matt@XXTuning.com
-Matt@XXTuning.com
#13
I see like 3-4 1/2 " gaps ???????????
looks like poop...... I dont think you got the right kit, the kit should be much much less choppy....
good thing he didnt charge you for it,, ask him to remove it for free also.
good luck.
looks like poop...... I dont think you got the right kit, the kit should be much much less choppy....
good thing he didnt charge you for it,, ask him to remove it for free also.
good luck.
#16
I'm sorry that looks horrible. I got my stuff installed and it took 1 hour but the front bumper piece was only 2 pieces, one for the bumper and one for the bottom part under the black grille. It stretches to the edge as well but doesn't cover the yellow sidemarker light on the bumper. I have some pics in another post if you take a look.
#18
Guest
Posts: n/a
Originally posted by z461
I'm sorry that looks horrible. I got my stuff installed and it took 1 hour but the front bumper piece was only 2 pieces, one for the bumper and one for the bottom part under the black grille. It stretches to the edge as well but doesn't cover the yellow sidemarker light on the bumper. I have some pics in another post if you take a look.
I'm sorry that looks horrible. I got my stuff installed and it took 1 hour but the front bumper piece was only 2 pieces, one for the bumper and one for the bottom part under the black grille. It stretches to the edge as well but doesn't cover the yellow sidemarker light on the bumper. I have some pics in another post if you take a look.
-Matt