Is this injector fine?
#1
Registered User
Thread Starter
Join Date: May 2014
Location: Kiev, Ukraine
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Is this injector fine?
Hello everyone!
I've just received a set of used OEM injectors and one of them has this kind of damage.
I've flow tested them at the shop and they said injectors are ok, but when I brought them home I've seen this kind of damage. And I've checked ebay photos - it was there even before flow test.
Just wanted to know if this kind of damage will affect spray pattern.
I've just received a set of used OEM injectors and one of them has this kind of damage.
I've flow tested them at the shop and they said injectors are ok, but when I brought them home I've seen this kind of damage. And I've checked ebay photos - it was there even before flow test.
Just wanted to know if this kind of damage will affect spray pattern.
#2
Registered User
iTrader: (1)
Join Date: Apr 2008
Location: guelph, on. canada.
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
as long as its not cracked you should be alright. the nozzle looks to be undamaged, aside from the dent in the casing. if another can be had easily, then get another, for piece of mind. but nothing wrong with installing it to see if it works, if it causes a misfire on that cyl then replace it.
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM